Faucets with high flow rates waste water—not to mention the energy used to treat and deliver it to our buildings—and the additional water stresses our wastewater treatment systems.

Hello Sustainable Community Design Leaders!

I have an exciting announcement today, fall Peer Network events are now open for registration! You can see all the event details and register here!

Based on feedback we received from past events and the most recent surveys, we decided against doing one long week of events for this fall... Read more

Dear SLD-ers,

We have a project team considering the use of copper cladding for a high profile project in Vancouver. The preference is to use pure copper that is pre-patinated and does not have additional coatings.

We are attending a CEU from the Copper Development Association to understand options and environmental impact, but we... Read more

Welcome to the quiz portion of The Urgency of Embodied Carbon and What You Can Do About It​​!

Learning Objectives
Upon completing this course, participants will be able to:


Define “embodied carbon” and explain why embodied carbon is a significant source of greenhouse gas emissions, which threaten health and safety... Read more

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

Hello SDL!

Has anyone set "Ecosystem Benefits/Service" targets for an individual project or for all their projects? I was previously against the idea of even measuring ecosystem benefits but I've had my mind changed in recent months!

Currently we want to set a target for every project to: "Improve ecosystem benefits on every site... Read more

Hi All,

Jacob Knowles from BR+A reached out with a request and I’m passing it on to you all.  Jacob’s contact info is at the bottom of this so you can respond to him directly or respond here and I’ll forward it on:

We are working on assembling examples of large wet lab buildings that employ strategies to greatly reduce fossil... Read more

Dear Esteemed colleagues: I was recently asked a good question in light of the impending (fingers crossed) passage of the reconciliation bill that will bring alot of funding to energy efficiency/decarbonization upgrades at the residential scale. The question is: What are the arguments/ scenarios about the importance for homeowners to contract... Read more

This is a bit off the thread of sustainable design leadership, but how much design and/or leadership can you get done without an adequate amount of caffeination?

We are looking for recommendations and advice on improving the sustainability of our breakrooms, particularly on the subject of beverage (mostly coffee, but also a fair amount... Read more

We are growing our Design Performance Group at NBBJ! We're looking for two special people right now: a senior sustainable material consultant and a senior energy analyst. Help us design the next generation of healthy, low impact buildings - this is a chance to impact across the scale of our global company and build a better future! Know anyone... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Why high-performance assemblies? And why now? Today we demand better thermal performance from our building assemblies than ever. But higher performance... Read more

Hi everyone,

As part of our monthly SDLS call yesterday, we looked through the 2020 SD Leaders Winter Summit Report. To help paint an even fuller picture of what was covered at that summit, here are slides from many of the 5-minute presentations.

As a note: we have permission from these presenters to share their slides within the... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

Hi all!

I've heard several people talk about developing tools for assessing/codifying a client's values for a project as part of an integrated design process (ie. a set of questions, survey, etc.). Would anyone be willing to share?

(Z, are you listening? I specifically recall you mentioning a tool like this...)

Thanks!... Read more

Jenny/Dan:

What types of content do anticipate having in the Documentation Toolkit tab? Here's an example of what we have on LEEDuser:

https://leeduser.buildinggreen.com/credit/EBOM-2009/SSc5#tab-docs (login required)

The layout is a little complicated on LEEDuser, since we had to work with a lot of legacy content, but... Read more