Has anyone worked on a WELL project? I have heard that you can expect about 1.5 to twice the effort of LEED coordination but wasn't sure how accurate that was. Any suggestions for determining the possible time commitment of WELL coordination?

Thanks in advance!

Has anyone used the new 3M Smog-Eating Granules on a roof before? Malarkey and Soprema are offering this as an option for their roof shingles. Seems like a great technology for urban areas, but I'd be curious to see if anyone here has actually successfully specified and installed it.

https://www.3m.com/3M/en_US/roofing-granules-us/... Read more

Dear Colleagues:

This is a request from AIA COTE Advocacy to sign another petition on behalf of your firm. I know it's incomprehensible that we have to do this, but we at AIA COTE Advocacy think the US Federal Emergency Management Agency's removal of the term "climate change" from all their strategic planning documents is evidence of an... Read more

Someone made a tombstone to mark Internet Explorer’s end-of-support date

https://www.engadget.com/internet-explorer-tombstone-175433997.html

Sustainability leadership has requested that you take this quiz to help assess sustainability literacy across the firm. Your own results will be presented to you at the end of the quiz but will not be shared with anyone else. Only aggregated, anonymized results will be available to others.

Please don’t do research to inform your answers... Read more

Hi folks,

BSR/ASHRAE/ICC Standard 240P, Quantification of Life Cycle Greenhouse Gas Emissions in Buildings, is out for Public Review until March 18. It covers what construction activities have to be tracked and reported and provides placeholder values to use during design. If you have input or suggestions on what would be needed to make... Read more

Has anyone done any museums in which they hired an independent QA/QC specialist? Or perhaps, your firm offers QA/QC services and experise in this area? If so, could you please reach out to me? I'm wondering what firm you used and what your experience was. Was it worth the fee?

My firm didn't have representation at the winter summit, but I've just read the report (thank you, RoseAnn!), and was really glad to see there was conversation around mass timber. I'd love to talk with anyone who was involved in that roundtable to get a deeper download about the discussion. We've been doing a lot of mass timber buildings and... Read more

A new article addressing whether PFAS finishes on upholstery fabric actually work (Spoiler alert - they don't) has been published and can be found here:

https://journals.sagepub.com/doi/10.1177/24723444231159856

This is authored by the fine folks at Green Science Policy, Arlene Blum's group that is the source of the Six Classes of... Read more

Welcome to the quiz portion of When Passive House Goes Big!

Learning Objectives
Upon completing this course, participants will be able to:


Evaluate the main barriers to achieving the Passive House Standard on a large, urban project.

Identify design strategies for successfully and cost-effectively achieving the... Read more

There are a number of clear finish options available, from natural oils and low-toxicity products primarily used on residential woodwork through factory-applied finishes where specific aesthetics and/or added durability are required (such as those used on cabinetry or commercial architectural millwork). Many of these have very high VOC levels,... Read more

Hi all, 

I'm posting this on behalf of Wyck Knox of our office. He can be reached at knox@vmdo.com: 

"I’m on the editorial board of the Green Schools Catalyst Quarterly, the only peer reviewed journal dedicated to sustainable K-12 schools. (http://catalyst.greenschoolsnationalnetwork.org/gscatalyst)

One of my tasks in that... Read more

I'm curious who in this group has used ASHRAE Standard 209-2018, Energy Simulation Aided Design for Buildings except Low Rise Residential Buildings?

We've used it internally (minimally) as a reference to help better communicate the goals and activities involved with energy modeling at various phases of design. But it seems like there's... Read more

Good morning:

I am hoping someone can point me in the direction of any higher ed campus standards or policies focused on plug load management, occupant behavior related to energy, etc. I'm especially interested in any examples of communications to faculty or students encouraging behaviors that reduce energy consumption. Thanks!

Welcome to the quiz portion of Integrated Design Meets the Real World.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define the integrated design process and describe what makes it different from the conventional design process.
2. Describe the charrette process and list... Read more

Received answers from below questions from NIST Andy Persily

1. Is there a preferred bookends range of CO2 for both “optimal” energy and human performances?

Andy: No

2.Is the ASHRAE ventilation of 1000-1200 ppm average, probably not based on performance, suggesting current ventilation rate is sub-optimal with cognitive... Read more