Hi all,

Are you looking for a senior level sustainable design position in Canada?  We’re hiring a sustainable design leader and senior sustainable design consultant with location options in Vancouver, Toronto, Edmonton, Calgary or remote (Canada only). https://dialogdesign.ca/careers/current-openings/

I joined DIALOG 10 months ago... Read more

Wood decking requires potentially hazardous preservatives and stains, and plastic waste is a significant environmental problem.

BuildingGreen-Approved Decking

Composite decking approved by BuildingGreen has at least 50% total recycled content. For plastic decking, post-consumer content has to be greater than 50%.

Health and... Read more

As we begin to look into Scope 3 emissions reduction strategies, it's important to understand ways to reduce tranportation emissions to project sites. Is anyone aware of best practices or programs for contractor carpooling to jobsites? I know many of my colleagues travel to work together in one vehicle because of parking limitations, however,... Read more

It was great to see everyone who was able to join in the peer networks webinar and to be able to share a brief update on what the Defining and Measuring Resilient Outcomes working group has accomplished over the last year... and what we are looking forward to tackling in the coming year. 

I've both attached a copy of the deck here and... Read more

Is anyone aware of research or guidance that has looked at VOC’s from roofing products and ventilation intakes? I’ve done some searching, and focus is mainly on managing the construction process to reduce installer exposure. 

Thanks for any help!

Tate

Our Green Team is holding a Biophilic Design workshop on Earth Day with our own staff for biophilic interventions within our office space. We are referencing the Biophilic Design Guidebook from LBC but it will be a shorter time frame, about 1.5 hours total. Last summer we introduced biophilia to the office through the exercise where each person... Read more

Hi Sages,

As you may have seen in my message, the Peer Networks Member List is not very helpful to us (yet), because a person can only show up in one network. Many of us are also in SDL or other networks; there are many more of us than show up when you filter that list for "Sages."

Until we can get that fixed, we'll share the... Read more

Hi,

We have a market-rate housing highrise project that is going through VE right now: we need cheaper/lighter rainscreen claddings than precast concrete or GFRC.

If you've gone through this similar exercise, I would greatly appreciate recommendations for cladding manufacturers/products with EPDs available. We are open to metal... Read more

Hello,

We're trying to budget Fitwel Certification consulting fees for a non-profit client for whom we're designing an early childcare center in Louisville, KY. It would be for a single tenant new building Fitwel certification and include a Fitwel introduction workshop, working with design team, and coordinating/submitting documentation... Read more

EDITED LINK

Hello, below is a link to our newly uploaded research report, Embodied Carbon in Commercial Furniture. This new research report introduces a case study and some new baselines for measuring the carbon footprint of commercial furniture, to add to a growing body of work on this topic among our peers:
Embodied Carbon in... Read more

All--

Metropolis magazine asked me to write a long piece about the current state of post-occupancy studies. I'm wrestling with whether to do it and how to approach it, but it would be helpful to hear your thoughts on the following--

--importance of the topic

--typical and atypical approaches and criteria

--examples... Read more

Greetings Gurus, following the AIA COTE Design for Economy concept, does anyone have a resource for a list of building efficiency ratio "targets" by space type? I've always struggled with this initiative. 

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Stick-framed walls are labor intensive and have to be sealed and insulated in the field, where conditions are not ideal; this can lead to poor thermal performance.

BuildingGreen-Approved Structural... Read more

I know there are a few of us WELL Performamce Testing Agents / Organizations represented in this group. In the wake of technology talks on this weeks update calls from IWBI, I'm wondering if anyone would be interested in a best practices and equipment small group discussion within the safe space of Green Gurus? Let me know! 

Welcome to the quiz portion of Protect Your Spec: 14 Strategies. 

Learning Objectives
Upon completing this course, participants will be able to:


Identify ways to ensure continuity between the environmentally preferable materials in a project specification, and the less-than-ideal materials that end up used in the final... Read more

Hello All,

A group of us (three architects and a builder- sounds like there should be a joke here) were debating this and we  are stumped.

Application: Residential exterior trim.

50 year warrantied composite product of agricultural byproduct with PVC (EPD not published yet) vs 100 year (if primed on all sides and painted or... Read more