Hi All,

Has anyone successfully adopted a Revit to ClimateStudio workflow with their new export tool? Right now we are using cove.tool because it works reasonably well with iterative Revit modeling, but are itching to try a more accurate and nuanced alternative.

Thanks for any and all experiences!
Misha

Fluid-applied roofing materials can be added to an existing roof to extend its life and provide reflective characteristics.

BuildingGreen-Approved Roofing

Products listed by BuildingGreen have VOC levels below 50 g/l and reflective surfaces to reduce heat gain.

Energy Star requires initial reflectance of 0.65 for low slopes... Read more

Hi all,

We have a project in New Orleans that needs to meet the GSA Inflation Reduction Act (IRA) requirements and submit EPDs. For our concrete, there is only one manufacturer that meets the requirements and is more than 50 miles away (according to EC3). Does anyone have tips on attempting to talk to local concrete manufacturers about... Read more

Hello!

I am working with a state agency who is interested in exploring performance contracting (primarily energy focus, but not necessarily limited to...) and it's been a while since I had heard of others implementing this (GSA, some universities).

Do any of you out there know of current/recent owners executing performance... Read more

All,

We are collecting examples of buildings that involved electrification initiatives (building does not need to be all electric as long as largely electric). Please share your projects with us through this short survey. It will take 8-10min to complete.

The study will culminate into a report and best practices to advocate for... Read more

Received answers from below questions from NIST Andy Persily

1. Is there a preferred bookends range of CO2 for both “optimal” energy and human performances?

Andy: No

2.Is the ASHRAE ventilation of 1000-1200 ppm average, probably not based on performance, suggesting current ventilation rate is sub-optimal with cognitive... Read more

Hi everyone,

It was so wonderful to meet some of you last month and experience the whirlwind of a summit! I hope you've enjoyed looking over the Summit Report and the flip chart notes, and they've helped bring some order to the vast amount of material we covered. Here's one more piece for you - slides from the 5-minute presentations.... Read more

Hey, everyone! Many of you on this forum have probably already RSVP'ed but I wanted to put a plug out there for the happy hour event on the evening of November 2nd at our office in San Francisco.

The event is co-hosted by Architecture 2030 and national and local AIA COTE. There will be food, drinks, great people, and a chance to preview... Read more

Sujatha Das of Haskell has put together a survey to help define the role of a Construction Company Sustainability Manager--I thought this is something many here might be willing to help with, and benefit from! 

Sujatha will share the results of the survey with those that participate assuming they provide the optional contact information... Read more

Welcome to the quiz portion of Re-Framing Sustainability: Green Structural Engineering.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. List at least three design approaches to green structural engineering.
2. Recognize two issues that would encourage owners to invest in... Read more

Hi MEP Leaders,

Just a reminder that our monthly call is next Tuesday, July 11, at 2pm ET. Chris Colasanti will be presenting on impacts of different facade characteristics on overall energy performance! 

All Network members are welcome to join. Here is the agenda, and below is the Zoom info:

Join Zoom Meeting
https... Read more

Hi folks,

USGBC has commissioned this survey of the building industry about Federal tax incentives for building efficiency. They will be sharing results with congressional staff, so this might be a good opportunity to give them feedback from the field!

And it's just 10 minutes.

And, after you do the survey if you want to... Read more

Does anyone have a draft copy of the ASHRAE 209P standard? It has not been finalized? See an overview of it here from IBPSA 2016 summer meeting.

The 209 committee plans to release it for a 3rd public review and hopes to finalize it in late winter or early spring. I'm just trying to track down one of the earlier verisons of the document... Read more

Greetings, All.

The Resilient Outcomes Working group has been putting together a resource list (and map) of resources for supporting resilience-focused design across the US.  So far, we have around 50 resources on the list, ranging from the AIA Resilient Design Toolkit to local Vulnerability and Adaptation reports and tools.

We... Read more

Hi MEP Leaders,

I would not normally post a job on this forum, but Placetailor is seeking to hire a mechanical engineer.  They are one of only two truly sustainable developers that I've ever heard of.  They are an integrated developer / builder / design firm that builds everything they touch to Passive House and carbon neutral standards... Read more

Hi Leaders,

We've pulled together some highlights from each of the three half-day cross-network workshops that happened in October. This report captures the gist of each workshop:

Net Zero What? Transitioning our Metrics from Energy to Carbon Getting Better Materials Into Projects Beyond the Property Line: Bringing Clean, Resilient... Read more