We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

This article just came up in my news feed. I thought you’d all like to read it. I will point out that C&D-specific MRFs have told me that they are really good at single-stream C & D waste, as long as the drywall is pulled out.  Any drywall in a single-stream C & D dumpster ends up in the landfill. Drywall just breaks apart and gets... Read more

Glazing connects occupants to the outdoors, but with so many opportunities for air leakage, poor insulation, and thermal bridging, glazing is the primary weak link in building energy performance.

BuildingGreen approves glazing that offers strong energy performance properties for a variety of... Read more

Pumpy Nullifidian

Following up on the Decarbonizing Existing Building: Envelope + MEP Solutions Integrative Design Jam, a cohort of us determined a "Decision Making Tree Toolkit" that begins to classify decisions into and "if/then" framework using region, market, climate, scale of intervention, and other factors would be useful in helping us collectively move... Read more

Welcome to the quiz portion of LEED vs. Green Globes: A Definitive Analysis

Note: If you are taking this quiz as a member of LEEDuser, please take the quiz here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Highlight the most significant differences between LEED and Green... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more

All,

The current version of the program manual includes ID numbers for the best practices, as shown below. I know we want to keep a quick reference number or ID, but though it would be worth asking if we want to use the below, reorder them in some way, or use a different kind of ID. Opinions?

Thanks,
Jenny

--------... Read more

Hi everyone,

As part of our monthly SDLS call yesterday, we looked through the 2020 SD Leaders Winter Summit Report. To help paint an even fuller picture of what was covered at that summit, here are slides from many of the 5-minute presentations.

As a note: we have permission from these presenters to share their slides within the... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Asking for a colleague:

"Have you ever had a large number of fire retardant tarps used to temporarily enclose a building during construction? Do you know of any solutions for recycling/reusing them or another product that doesn't use toxic fire-retardants that meets the performance criteria?"

I think we've all seen poly or fabric... Read more

I'm sure most (if not everyone) is aware that LEEDv5 is under public review until May 20, 2024. I know I need to make time to flip through it, review, and comment, but I'm having a heckuva time protecting the time in my calendar to do that. Anyone interested in joining me for a 60 - 90 minute meeting to do this together as an accountability... Read more

Tomorrow is my last day at FXCollaborative before I head back to school. It has been such a gift to engage with you all over the past 10 years. Please stay in touch - my contact information is ilanajudah@gmail.com. I am headed out to UBC next week to do a deep dive into resilience and adaptation in urban environments.

FXCollaborative... Read more

Hi SDLers: ESG Investing is mushrooming which is a very good thing. AIA National, for example, just switched over to 100% ESG investments. With it, there seems to be a growing number of "ESG-lite" options. I'm wondering if anyone among this informed group has recommendations on how to determine a quality investment approach. I'd appreciate any... Read more