test

Hello Sustainable Advising members,

Nadav and I have created a spreadsheet based on the matrix you all created at the Summit Palooza. The idea of filling this in with your services and activities is to get to know one another better, be able to support each other and build camaraderie. 

Please take the time to enter the necessary... Read more

Hello- If you use Procore....

Are your jobs using a template to conduct and create "reports" of their IAQ inspections? Did you set it up in forms or inspections? Would you mind sharing an example template with me? I know Green Badger has a great app to do this, which we use. We would use inspections in Procore for jobs that are not using... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

In simpler times, our buildings were made primarily from local, natural substances like stone, wood, straw, and clay.

But lifestyles have changed dramatically since these were... Read more

Welcome to the quiz portion of Green Design: What's Love Got to Do with It?

Learning Objectives
Upon completing this course, participants will be able to:


1. Summarize how designers are better able to fulfill the full promise of sustainability by embracing sensory experience.
2. Broaden the sustainable design... Read more

This article just came up in my news feed. I thought you’d all like to read it. I will point out that C&D-specific MRFs have told me that they are really good at single-stream C & D waste, as long as the drywall is pulled out.  Any drywall in a single-stream C & D dumpster ends up in the landfill. Drywall just breaks apart and gets... Read more

Prefabricated, or modular, buildings can provide environmental advantages over conventionally constructed buildings. They are built in factories where manufacturing and cost can be tightly controlled, so materials are kept out of the elements, there is less waste, and thermal properties and air sealing can be enhanced. There are also fewer... Read more

Hello Folks,
What is your experience with successes and failures in the design process? As a starting point I have listed my Top 5 for success, and my Top 5 for failure. We'd love to see your reactions and look forward to the discussion when we all meet next week at our monthly check-in.

Top 5 reasons for when integrative design... Read more

As if you weren't worrying enough already, here's a little something that I ran across through monitoring activity on the American Society of Healthcare Engineers discussion boards:  https://www.id-hub.com/2018/10/17/hospital-plumbing-reservoir-resistance-interview-amy-mathers/, "Hospital Plumbing as a Reservoir for Resistance".  This is both a... Read more

Hi all,

We have a newly constructed, core/shell project having some hot water issues in the core restrooms.

There is a 0.35 Toto lav installed throughout. The hot water heaters are adjacent on each floor, located in the janitor closets. We did the math, and there could be a gallon of water standing and cooling in the pipe between... Read more

Hi SD Leaders,

As you may be aware, this past April a group of manufacturers calling themselves the Living Product 50 responded to the letters that many of us sent about five years ago advocating for transparency in their product ingredients.  A copy of that letter can be reviewed about midway through the page at this link:  https://... Read more

Hi Everyone.  Hope you and your families are all healthy and safe.

We are starting to figure out how we are going to implement the Contractors Commitment at my company, and we're using the opportunity to simultaneously set corporate wide and jobsite metrics and goals for sustainability tracking.

Each year we issue a sustainability... Read more

Hi: Please check out the fantastic editorial from Ned Cramer at Architect on "The Future of Architecture Education is the Future of Civilization". The deadline to comment on the latest draft of the NAAB accreditation criteria is November 22 and, as in the past draft, it falls far short of prioritizing climate action and sustainability. VERY... Read more

Hello - 

I am looking for the recording and the PDF/ slides that were shared 3/6 for the project process share-out/ 5 min presentations. It was super inspiring and I would like to refresh my memory of some of what was shared. Thank you!

–
Alison Nash 
AIA, LEED AP ID+C, CPHC, WELL AP
Associate | Sustainability... Read more

Concrete and other cementitious materials have both environmental advantages and disadvantages. As builders and designers, should we be looking for alternatives or embracing concrete over competing materials?

This special report takes a look at how these materials are made, presents the key environmental considerations relating to their... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Jenny/Dan:

What types of content do anticipate having in the Documentation Toolkit tab? Here's an example of what we have on LEEDuser:

https://leeduser.buildinggreen.com/credit/EBOM-2009/SSc5#tab-docs (login required)

The layout is a little complicated on LEEDuser, since we had to work with a lot of legacy content, but... Read more

Meet the winners:

2024
2023
2022
2021