Hi everyone, it was so great to meet some of you at the winter summit and finally connect names with faces!

We have a project that is targeting CalGreen Tier 2 and LEEDv4 Platinum.  Thought I'd reach out to see if anyone on this forum has found comparison guides between the two?  Looking for something similar to this CalGreen 2013 tier... Read more

Welcome to the quiz portion of Occupant Engagement: Where Design Meets Performance.

Learning Objectives
Upon completing this course, participants will be able to:


1. Restate at least five methods being used to provide feedback to occupants so that they better understand how to interpret, and respond to, their... Read more

Hi SDL!

Our CM recently offered up the possibility of substituting Pozzotive into our structural and paving concrete mix (www.pozzotive.com) on a large public building. Apparently it is on a level with the cost of standard cement.
We are eager to reduce the project's embodied carbon, and this seems almost too good to be true.

Per our discussion on today's SMEP call, it would be interesting to have a more in-depth discussion on Indoor Air Quality. Questions I have personally...

Lauren Shumaker (Turner Construction) and I are starting a group to focus on improving the submittal process, currently focused specifically on healthy & sustainable materials and the use of the mindful Materials library. The purpose of this working group would be to align project management and LEED project software (ex: Procore, CMiC,... Read more

Has anyone heard of floating solar technology? I can't think of an application other than covering power plant retention or agricultural waste lagoons. Covering up the sun on a natural body of water and adding electrical wiring seems like a bad idea. I am curious though if others have heard of this technology and have other (unbiased) ideas... Read more

I have a client seeking grant funding & they're vetting current US technology around large-scale prefabricated mass timber. My question to this group is if this currently exists anywhere in the US.

Qualifications:

10+ years experience manufacturing and installing large-scale prefabricated mass timber elements into completed... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Standard spray polyurethane foam (SPF) insulation is made using blowing agents with extremely high global warming potential (GWP), which can cancel out much of the potential energy savings from use over its life... Read more

I read a very misleading article on the AIA's website today regarding antimicrobials and the benefit of microbicidals in paint. It was written by a manufacturer, not a healthcare professional, and was not obviously labeled as sponsored content on the website. (I received the link in an email, which did label it as such).

https://www.aia.... Read more

Hi Fellow SD Leaders: This webinar from the AIA and the Building Resilience Coalition looks highly relevant and with some great speakers. It's free and open to all (I think...not sure how AIAU works for non-members.)

Free climate change risk webinar 10/23

Join members of 52 organizations of the Resilience Building Coalition for... Read more

Hi All,

I'm teaching a class this semester at CU Boulder on Zero Carbon Buildings and Cities (a new class that I'm making up as I go). The hardest part, I'm finding, is locating some good materials that cover the basics of energy efficiency for non-building engineers or designers (we are energy and sustainability generalists in this... Read more

Hello All-

  We have a K-12 school project that is using a R-60 flat roof assembly as an energy & costing benchmark (along with other energy efficiency measures but this is the relevant detail to our question).  The project mechanical engineer is not onboard with a number of our energy conservation measures and has been sharing... Read more

Hello Green Gurus!

Here are the details for the next Peer Networks Webinar (happening next week!): Don't forget to REGISTER HERE!

Define and Contract for Building Performance Simulation Services Using ASHRAE Standard 209
Thursday, February 13, 3pm EST (12pm PST)

ASHRAE Standard 209-2018 “Energy Simulation Aided Design... Read more

Hello Green Gurus,

Happy 2023! Our First Friday Fika* is today - Friday, January 6th at 11am ET (8am PT), we'll meet on Zoom for some lightly structured coffee-chat time. This includes both facilitated sharing and open conversation about the topics you're interested in at the moment. Any Peer Network member who wants to say hi and chat... Read more

Hi all,

Here's a good follow up to Maria's steel question on Monday.  We have a Midwest project that unfortunately (from a carbon perspective) is required to use a traditional, thick precast facade.  We’re working with the contractor and potential future (not yet bid out) fabricators to determine an appropriate % of pozzolanic material... Read more