Huge congratulations to everyone involved with a Top Ten winner this year! 

In a rare feat--Leddy Maytum Stacy got two!

Also P+W, Lake|Flato with Cooper Cary, WRNS, SOM, Olsen Kundig, KieranTimberlake, DLR--nice work! (And who is Studio27?)

Here's James Wilson's take on what's special about each winning project.

... Read more

We have a project that is looking for plaster/stucco/textured wall products that are sustainable, or “more sustainable.”

I know these products exist, but I haven’t had to spec or work with any, so I’m reaching out.

The project is in MA, so I'm also soliciting recommendations for products and/or companies who are experienced using... Read more

Hello Green Gurus,

Here is the information for January's Peer Networks Webinar, The AEC Industry is in the Driver's Seat: Strategies to reduce waste & carbon emissions. We hope you will join us!

Register HERE

The AEC Industry is in the Driver's Seat: Strategies to reduce waste & carbon emissions
Thursday,... Read more

Have any of you relied on Green Badger for LEED documentation on projects?

I am familiar with the tool and know Tommy from my time in Atlanta, but have not used it on a construction project.

Have you found value? Thoughts?

Either way, they publish a pretty nifty "LEED v4 Construction Tool Kit" that may be useful for your... Read more

Welcome to the quiz portion of Choosing Insulation: High-Performance Wall Assemblies – Unit 3.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe key environmental and performance factors for insulation materials.
2. Recount bottom-line insulation material... Read more

We're now mid-way through Summer Summit season! One of the “good problem to have” challenges we’ve had at recent SDL Summits has been too many great five-minute presentations. It’s hard to find time for them all. This year, since we’ll be online anyway, we can get a jump on that by starting the five-minute presentations early in addition to... Read more

The current Stantec/BuildingGreen featured topic is Material Health. Read on to learn the essentials, and then dive deep to earn CEUS.

Also see the Resilient Design featured topic, and also a survey of topics trending in Stantec’s regions.... Read more

Sustainability leadership has requested that you take this quiz to help assess sustainability literacy across the firm. Your own results will be presented to you at the end of the quiz but will not be shared with anyone else. Only aggregated, anonymized results will be available to others.

Please don’t do research to inform your answers... Read more

Hi,

HKS is seeking two seasoned sustainability leaders to be part of the DesignGreen Team embedded into either our Mission Critical and Commercial Mixed Use practice. In general, the role is to service clients and drive sustainable design quality forward. We have a great team and need even more wise, energetic, creative, and committed... Read more

Hi everyone,

As part of our monthly SDLS call yesterday, we looked through the 2020 SD Leaders Winter Summit Report. To help paint an even fuller picture of what was covered at that summit, here are slides from many of the 5-minute presentations.

As a note: we have permission from these presenters to share their slides within the... Read more

Hey everyone, 

With the coming In-Use Off-Road Diesel-Fueled Fleets Regulation | California Air Resources Board we have been doing some research on availability of R-99 fuel prior to the January 1 start date. One thing we aren't finding in the research is an estimate of cost impacts. Has anyone started rolling out R-99 on their sites yet... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Concrete is one of the construction industry’s largest carbon emitters, responsible for about 5% to 8% of the world’s anthropogenic greenhouse gas emissions, yet it is also one of the most important building materials.

There are well-proven ways to reduce... Read more

Just saying "Hello"  and happy to be joining the SDL peer network.  I am leading the effort at Integrus Architecture (Seattle and Spokane) to integrate performance and design and am looking forward to learning how others are accomplishing the same. 

Hi folks,

I'm looking into lower-carbon pipe options for HVAC and plumbing. The MEP 2040 has slides from a Buro Happold study in 2020 showing PEX to be much lower in embodied carbon than copper, which is unsurprising. CPVC is also a lower-carbon option.

But PVC has its issues and neither PVC nor PEX are recyclable (especially if... Read more

For those who are visiting Chicago, Kira Gould has asked me to spread the word about a casual AIA COTE meet-up. Stop by, meet friends and have a beer.

If you will be in Chicago on November 15, please consider joining a casual meet-up of COTE leaders/members/friends (no fee to join; it's pay-your-own-way at the pub):  

AIA COTE... Read more

Hello Sustainable Advising members,

Nadav and I have created a spreadsheet based on the matrix you all created at the Summit Palooza. The idea of filling this in with your services and activities is to get to know one another better, be able to support each other and build camaraderie. 

Please take the time to enter the necessary... Read more

To piggyback off Nathan's introduction where he mentions construction waste management, who is doing anything innovative or different in managing construction waste?  Construction waste has not historically been a passion of mine, but now working in sustainability and construction, I feel like it has to be by default.  

We have a... Read more