Hi all, 

The San Francisco Department of the Environment is hoping to gather info from designers and specifiers about construction surplus materials. Their survey is 8 questions total and not limited to those in the SF area. 

Pasting info below if you have a chance to participate! 

Calling Designers and Specifiers:

... Read more

Hi all,

We are looking to study Passive House on a couple small multifamily projects. Our understanding is that WUFI Passive only integrates with SketchUp at this time. Our BIM manager has been trying to find an example of a firm that works in Revit and uses WUFI Passive, to point him in the right direction on workflow. I offered to ask... Read more

It’s hard to believe COP28 is upon us. Kicking off tomorrow (11.30) and concluding 12.12, it’s sure to be a full few weeks of sharing, live streams, and interesting takes.

We’ve been excited to see a few Peer Network members represented as attendees in Architecture 2030’s (in-person and virtual) delegation.

I've got exciting news to share! Ayers Saint Gross' JUST disclosure went live on Monday. See our blog post about it here: https://asg-architects.com/ideas/blog/. That has a link out to our actual disclosure as well. It's been a bananas week with our internal communications campaign on it in full swing. I know a number of your firms, based on... Read more

Greetings, all:

AIA COTE Advocacy is working with AIA Gov't Affairs to assemble a directory of COTE-friendly AIA Members who are passionate about environmental advocacy and VOTERS in targeted congressional districts. We are organizing in-district meetings after the mid-term elections focused on the members of the Senate Energy &... Read more

Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more

Hi All,

Has anyone successfully adopted a Revit to ClimateStudio workflow with their new export tool? Right now we are using cove.tool because it works reasonably well with iterative Revit modeling, but are itching to try a more accurate and nuanced alternative.

Thanks for any and all experiences!
Misha

Happy Earth Day! I'm sharing the results of our office Earth Day Mind Map, a collaborative event lead by our Green Team with office-wide participation. https://mm.tt/1471242441?t=4c76rJLKXz 

We are celebrating with a virtual happy hour later today and will use the Mind Map to generate conversation and sharing.

I would love to hear... Read more

My firm didn't have representation at the winter summit, but I've just read the report (thank you, RoseAnn!), and was really glad to see there was conversation around mass timber. I'd love to talk with anyone who was involved in that roundtable to get a deeper download about the discussion. We've been doing a lot of mass timber buildings and... Read more

Hi MEP Leaders,

I wanted to remind you that our monthly call is today, August 10th, at 2pm ET! This was rescheduled from the usual time - the second Tuesday of the month - due to a BuildingGreen staff retreat. If you usually can't make the Tuesday time, this is a great opportunity to join the call!

Here is the agenda, and below is... Read more

https://www.architects.org/awards/sustainable-design-0

All,

My BSA Co-chair, Steven Burke, and I want to make you all aware of the BSA Sustainable Design Awards coming up soon. Please see the above link for qualifications and registration information. This is an award which is attempting to work towards the same stringency, rigor... Read more

Welcome to the quiz portion of Video: Insights to Success on LEED-CI Certification.

Learning Objectives
Upon completing this course, participants will be able to:


1. Identify key changes to LEED CI 2009 (ID+C).
2. Identify the circumstances of a LEED-CI project that challenge the abilityto certify.
3.... Read more

Welcome to the quiz portion of Five Reasons to Be Optimistic About Solar Energy!

Learning Objectives
Upon completing this course, participants will be able to:


Describe three ways how PV decreases environmental impact while increasing sustainability and health measures for communities.

Discuss PV life-cycle... Read more

Has anyone worked on a WELL project? I have heard that you can expect about 1.5 to twice the effort of LEED coordination but wasn't sure how accurate that was. Any suggestions for determining the possible time commitment of WELL coordination?

Thanks in advance!

Hi all,

As you know, the Carbon Leadership Forum has been busy in recent years growing the tent of discipline-based commitments for reducing embodied carbon. SE 2050 and MEP 2040 provide the platform and commitment for structural and MEP respectively, and there is now interest brewing for an additional commitment in support of civil... Read more

Jill is a licensed architect with WELL and Living Future accreditation. Through her experience leading sustainable achievement and verification on projects in the workplace, K-12, civic, and retail/mixed use typologies, Jill brings her passion for sustainable materials across vetting categories, AEC disciplines, bid scenarios, and market... Read more

The prepublication version of the AGC playbook is online now. I just stumbled on this this morning but thought it would be great to get eyes on this early and start a discussion here on any of the included guidance. Happy Reading, excited to follow the discussion!

AGC Playbook on Decarbonization and Carbon Reporting in the Construction... Read more

Does anyone have a good recommendation for getting started with energy modeling with future weather files? We use a combination of Sefaira and Climate Studio, but open to suggestions. Even just links on how to approach this for making good recommendations to clients. Thanks in advance.