I can hear Kjell saying "All models are wrong, but some are useful." Having said that we are having trouble getting usuable predictive energy use information from our electrical design engineer. They are telling us that their energy models are not for accurate pEUIs but just to compare various scenarios. Are they being lazy? Should we push for... Read more

Hi folks,

The team at Open Architecture Collaborative Canada (website under construction) are developing a remote learning experience to address the lack of meaningful practice of design for social impact in the built environment-related design and planning fields. They’ve together a pretty detailed survey to help guide the development... Read more

Here is your friendly reminder to complete the SCL Salary Survey if you have not yet.

There is a link at the end of the SurveyMonkey Survey to a Google form where you will be able to register that you completed the survey—that way we’ll know who participated without having any identifying info in the actual survey. Results will be shared... Read more

I am excited to share with you the final draft of the letter back to LP50 manufacturers.  The LP50 manufacturers sent their “Closing the Loop on Product Transparency” to design firms earlier this year.  For more background information, please check out Chris Hellstern's original August 20th post on this Green Gurus forum.  When we posted the... Read more

Mass Timber Construction: An Economic Study of Supply, Best Use, and Implementation in three North American regions

This series unveils a macroeconomic study of building with mass timber in three U.S. regions; the Upper Midwest, Rocky Mountain Colorado, and the Southeast. 

Three companies - SCB Architects, LeMessurier, and Turner... Read more

This is sort of dragging up an ancient topic, but curious how your firms are currently addressing accreditation (LEED AP, WELL AP, LFA, etc.). There was a time when we were all talking about this, and a number of firms instituted requirements, but it has been a long time, and I'm curious how it's looking now in 2024. Thanks! 

Welcome to the quiz portion of Solar Thermal Hot Water, Heating, and Cooling.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain active and passive; direct and indirect; and low-, medium-, and high-temperature solar thermal systems.
2. Distinguish between the three most... Read more

HI All,

I am curious if others are using THERM in-house for your envelope design?

We usually use our building envelope/curtain wall consultants (Boston - so mostly RWDI and Heintjes) but our teams are finding that they need the information faster than our consultants can provide, they are backlogged, or we have some curtain wall... Read more

Metal windows are used in commercial building because of their durability, low maintenance, and ability to handle wind loads.

BuildingGreen-Approved Windows

Metal windows must achieve an NFRC-certified unit U-factor of 0.20 or lower to be approved by BuildingGreen.

Manufacturers also must demonstrate that their highest-... Read more

If your HVAC designers are addicted to the crack that is Trace 700, and knowing that Trane is giving up on that product in the coming year, what loads program are you weaning* them onto?

Asking for a friend:  Have any of you had success in using the Revit plug-in for loads?

*When told that they should use IESVE for loads, our HVAC... Read more

Hi all,

We are in the process of pursuing the Integrative Process for Health Promotion pilot credit on a project. Has anyone been through the process? What did you learn? How did it change/inform your design? Would you do it again?

Thanks!

Michelle

A site license allows your entire organization to access and share the guide, and to keep a copy in your library.  

We’re excited to be releasing the 2020 edition of Spec This, Not That. 

... Read more

Here's a file upload.

Hi folks,

We often hear from you with a suggestion of someone who would be great for the network, and a question about how to refer them. We've now made that easy, with three steps laid out in an Outreach Toolkit that's posted in the left margin of the Member Directory.

So, if you're thinking of someone to invite or come across... Read more

Folks,

In case any of you enjoy the Phoenix weather, I wanted you to be sure to know that our company, Sundt, which is headquartered here is looking for a sustainability director to lead up our efforts. This comes after two years of work and hiring a consultant (Brightworks out of California) to help us prepare and take the next steps. I... Read more

BuildingGreen is the most trusted voice in sustainable design and architecture.

This ad-free, member-supported resource is here to guide designers in using high-performance strategies, and in selecting sustainable and healthy products.

If you haven't already, start by creating your unique user profile to get your log-in, and be... Read more