Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon construction, however, may be less familiar. 

Contractors are just... Read more

Hi, and welcome to the Sustainable MEP Leaders Peer Network! 

This online forum is one of the ways we can stay connected and support each other as we collaborate to help MEP design achieve its highest potential as an element of sustainable and regenerative buildings. Please introduce yourself with a little about where you work, what you'... Read more

Just had a contractor call who said they had a university client interested in using natural-gas-fed fuel cells as an alternative to grid power in some applications.  They were interested in an intermediate scale: 300kW.

Anyone with any experience with these devices? 

HI All,

I have been tasked with putting together a cost comparison of doing a LEED v4 Gold building vs. making that same building Passive House. Obviously they are two different systems, with two different outcomes, and it's not really intended as a total apples to apples cost comparison, but more a value comparison for a developer.... Read more

I’m a volunteer member of the ASHRAE 209 ("Energy Simulation Aided Design for Buildings Except Low-Rise Residential Buildings”) Committee.  Are you familiar with ASHRAE 209? It was first published in 2018, and it outlines a process for incorporating energy modeling into the design process. 

From the forward: 

 ASHRAE Standard 209... Read more

Hi all,

As you know, the Carbon Leadership Forum has been busy in recent years growing the tent of discipline-based commitments for reducing embodied carbon. SE 2050 and MEP 2040 provide the platform and commitment for structural and MEP respectively, and there is now interest brewing for an additional commitment in support of civil... Read more

All,

We are collecting examples of buildings that involved electrification initiatives (building does not need to be all electric as long as largely electric). Please share your projects with us through this short survey. It will take 8-10min to complete.

The study will culminate into a report and best practices to advocate for... Read more

Hi all,

I've been working on a LEED project in California for months and our energy modeler wants to use the LI 10480 Title 24 2019 pipeline to demonstrate compliance under LEEDv4. Only problem is, I've never done it that way before, and our modeler and I are consistently speaking in different languages. Anyone done a project under this... Read more

Hi MEP Leaders,

Just a reminder that our monthly call is next Tuesday, July 11, at 2pm ET. Chris Colasanti will be presenting on impacts of different facade characteristics on overall energy performance! 

All Network members are welcome to join. Here is the agenda, and below is the Zoom info:

Join Zoom Meeting
https... Read more

Hi all,

I am on the planning committee for the National Adaptation Forum, which is an excellent conference (this will be the 6th annual) that has relatively little representation from architecture and engineering audiences. Our municipal and agency clients, as well as private sector, tend to attend this conference for climate adaptation... Read more

This message came in earlier today and is something of which we should all be aware.  I took the extra step, in this world of uncertain facts, of checking the veracity of the message with Jason Grant who confirmed it.  From William Bucholtz:

Dear Green Building Colleagues,

No one likes being fooled, but it’s... Read more

Hi all,

Our team has been working hard to wrap up this year's SCL Summit Report, and we're excited to announce that it is finally complete!

https://docs.google.com/presentation/d/1zcSPctZ1BiyPQomiw4wTQLajR816mm3KJV0BL5B14-0/edit?usp=sharing

In addition to the usual summary of key points from the summit, this report captures... Read more

Indoor pollutants can cause health problems and disrupt HVAC system functioning.

BuildingGreen-Approved Filtration

BuildingGreen approves a variety of equipment, filters, and pre-filters that remove particulates and contaminants, minimize pressure drop, or reduce pollution from operations. Products include:

Has anyone used the new 3M Smog-Eating Granules on a roof before? Malarkey and Soprema are offering this as an option for their roof shingles. Seems like a great technology for urban areas, but I'd be curious to see if anyone here has actually successfully specified and installed it.

https://www.3m.com/3M/en_US/roofing-granules-us/... Read more

Anyone aware of tools or workflows for modeling of a specific outdoor space and effective surface temperatures?  We've done a goodly amoutn of microclimate simulations, but never explicitly factored in the ground surface, in terms of emissivity and other related factors.   

Welcome to the quiz portion of The Cost of Comfort: Climate Change and Refrigerants!

Learning Objectives
Upon completing this course, participants will be able to:


Explain how refrigerants work, the energy challenges they present for design teams, and the opportunities for efficiency and building performance.

... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Katrina Amaral
Timberdoodle Farm

Jacob Dunn
ZGF

Steve Rigdon
Yakama Forest Products

Jennifer Shakun
New England Forestry... Read more