Fellow SCLers,

This is a small ball item, but I recently had a conversation with a safety glove manufacturer called Traffi. They make PPE, but in particular they have a line of gloves that they promote as carbon neutral. Their organization's operations are offset with retired RECs, but one line of their gloves, LXT, is offset by a... Read more

Has anyone worked with Vidaris for LEED certification and have a contact there? If you want to direct email me with feedback on the experience that would be helpful as well.

There are a number of clear finish options available, from natural oils and low-toxicity products primarily used on residential woodwork through factory-applied finishes where specific aesthetics and/or added durability are required (such as those used on cabinetry or commercial architectural millwork). Many of these have very high VOC levels,... Read more

Hi folks,

We've got another timely and engaging webinar lined up! Join Panama Bartholomy and Peter Rumsey for the latest on electrification policy and applications. (As always, if you can't make it at this time that's ok, we'll be recording it.) 

Register here to get the link: https://www.buildinggreen.com/peer-networks/webinars... Read more

Hello all,

Does anyone know of any Rebate Program for either induction cooking equipment or kitchen electrification (new or existing)? Looking for any local or state or even federal programs (outside of California) that incentivize designing/building/retrofitting towards an all electric kitchen for any program type (institutional, single... Read more

Hi SCL,

It's my first time posting in the SCL group, as a somewhat new member. I'm grateful for any input you can provide to me!

My company, Nibbi Brothers, is currently brainstorming how to roll out an EV incentive program to employees. We recently polled our staff to get a general idea of where they stood with EV in terms of... Read more

I'm hoping that some of you know someone with strong energy modeling skills who is looking for a job!  Moseley Architects is recruiting for a full time energy modeler (ideally either in our Richmond, VA or Raleigh NC office) to help us continue to press forward with understanding and reducing the energy impacts of our designs.  The job... Read more

All,

I wanted to spread the word to all of you that AIA Minnesota is hosting a virtual edition of Materials Matter, a five-part series starting next Wednesday 3/24, from 10AM-3PM Central Time on five Wednesdays throughout March, April and May. Come to one ($15 per session) or all ($60 for the whole series of 20 CEUs, including GBCI... Read more

Welcome to the quiz portion of Climate Analysis for Architects (recorded webcast).

Learning Objectives
Upon completing this course, participants will be able to:


1. Access climate data.
2. Choose appropriate design energy simulation tools.
3. Know when and how to run analyses with projected weather data... Read more

Hi all, 

I just wanted to post a quick message to introduce myself to the group. My name is Jeff Geisinger, and I'm an architect with Utile in Boston. We're a 50-ish person firm with a pretty broad project base, including affordable multifamily housing, institutional buildings, commercial interiors, and urban planning/public realm work... Read more

Hi Folks - 

The "request for participation" email below is from Brendan Owens, who most of you know was at the USGBC for over 18 years, and is now the Chief Sustainability Officer for the US Dept of Defense. As I read the text, I couldn't help but think of this group as a deep well of expertise and experience that could undoubtedly help... Read more

Hello Green Gurus,

I wanted to take a moment and introduce myself as I am new to the group. My name is Tim Pranaitis and I am the co-chair of the newly-reformed sustainability committee at Steffian Bradley Architects in Boston, MA. As a newer member of my firm, I have been tasked to re-start and grow our sustainability committee which... Read more

Welcome to the quiz portion of Choosing Windows: Looking Through the Options.

Learning Objectives
Upon completing this course, participants will be able to:


1. Choose a frame material based on its structural characteristics, thermal insulation, durability, maintenance requirements, cost, and effects on the... Read more

The AIA has just (finally!) amended the Code of Ethics and Professional Conduct to include new "Obligations to the Public" and  "Obligations to the Environment", that requires architects to advise their clients of their obligations to the environment, obligates architects to promote sustainable design and development, and to implement energy... Read more

I have a colleague researching existing, proposed, or anticipated changes to urban planning and building codes that encourage lower carbon footprints.

Can anyone comment on or point me to resources on how cities are using carbon footprint analysis and carbon reduction in permitting, now or in the future?

Some specific topics that... Read more

Hi folks,

We had a rich conversation in our monthly meeting last week. I've summarized the highlights below. Next call is July 11 at 2pm eastern. If it isn't already in your calendar, here's the Zoom link.

What’s on people’s minds?

Looking into high-temp water-source heat pumps for industrial applications. Transom and... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Thermal comfort is a science of both physics and people, always a tough... Read more

Hello everyone,

For those I have yet to meet, I'm Candace Pearson. I've recently rejoined BuildingGreen after a brief interlude at law school and am now getting back into the swing of things with editorial, consulting, and peer networks. 

We had a great turn out at this year's Show and Tell before Greenbuild and all of the... Read more