Prefabricated, or modular, buildings can provide environmental advantages over conventionally constructed buildings. They are built in factories where manufacturing and cost can be tightly controlled, so materials are kept out of the elements, there is less waste, and thermal properties and air sealing can be enhanced. There are also fewer... Read more

Hello Green Gurus,

Here is the information for January's Peer Networks Webinar, The AEC Industry is in the Driver's Seat: Strategies to reduce waste & carbon emissions. We hope you will join us!

Register HERE

The AEC Industry is in the Driver's Seat: Strategies to reduce waste & carbon emissions
Thursday,... Read more

Dear All!

Crowdsourcing here to see if anyone has access to two LCA's that can be used to compare functionally equivalent consumer products: a fossil fuel powered to a battery one?  (A good product might be a car or stove, or a heating system with a boiler compared to a heat pump, perhaps?  Needs to include the B-use phase probably...)... Read more

I'm sure most (if not everyone) is aware that LEEDv5 is under public review until May 20, 2024. I know I need to make time to flip through it, review, and comment, but I'm having a heckuva time protecting the time in my calendar to do that. Anyone interested in joining me for a 60 - 90 minute meeting to do this together as an accountability... Read more

Anne Hicks Harney, FAIA, has more than 30 years of experience, focusing on high-quality design imbued with a solid technical and sustainable foundation. At Long Green Specs, she provides sustainability-focused construction specifications and building material expertise to architectural firms across the country. She was chair of the AIA... Read more

Welcome to the quiz portion of Green Design: What's Love Got to Do with It?

Learning Objectives
Upon completing this course, participants will be able to:


1. Summarize how designers are better able to fulfill the full promise of sustainability by embracing sensory experience.
2. Broaden the sustainable design... Read more

Hello Green Gurus,

Here is the information for your October Peer Networks Webinar, Advocating for Electrification. We hope you will join us!

Register HERE.

Advocating for Electrification
October 26th, 2020
1pm - 2pm ET (10am - 11am PT)

Description
Hear from leaders in the AEC and policy community on... Read more

Hello Sustainable Advising members,

Nadav and I have created a spreadsheet based on the matrix you all created at the Summit Palooza. The idea of filling this in with your services and activities is to get to know one another better, be able to support each other and build camaraderie. 

Please take the time to enter the necessary... Read more

Hi:

I encourage you to review and sign this letter. 

Notes from BDC follow:

Really appreciate the outpouring of support we've received so far on this letter! Various groups let us know that they would like additional time to review, so we've decided to extend the deadline from June 23 to Thursday, July 14 at 2pm.

As... Read more

We are excited to open registration for the Sustainable Design Leaders Winter Summit 2020! This year’s Summit will take place Jan. 29th - 31st, 2020 at The Lodge, Gulf Shores, AL. The Summit agenda will be shaped by the collective group feedback given in the upcoming pre-summit survey. The Summit begins Wednesday evening (usually 5pm) with a... Read more

Hi folks,

I'm looking into lower-carbon pipe options for HVAC and plumbing. The MEP 2040 has slides from a Buro Happold study in 2020 showing PEX to be much lower in embodied carbon than copper, which is unsurprising. CPVC is also a lower-carbon option.

But PVC has its issues and neither PVC nor PEX are recyclable (especially if... Read more

For those who are visiting Chicago, Kira Gould has asked me to spread the word about a casual AIA COTE meet-up. Stop by, meet friends and have a beer.

If you will be in Chicago on November 15, please consider joining a casual meet-up of COTE leaders/members/friends (no fee to join; it's pay-your-own-way at the pub):  

AIA COTE... Read more

Hello all, there has been a fair amount of discussion about the emerging Cove Tool for early stage energy modelling and parametric optimization at our firm. I am very curious if any of you are using this software, and if so, what are your thoughts about it? 

https://www.covetool.com/

Thanks,

Esteban Matheus

Caseworks can be made from unsustainable wood and other materials, and with adhesives and finishes that offgas formaldehyde and other hazardous compounds.

BuildingGreen-Approved Casework

Approved caseworks are:

How much will it cost to achieve LEED v4 certification?

“We’d love a green building, but can we afford it?”

“We’re required to be LEED Silver, but we’re not sure how to get there under the new rating system.”

“Sure, we’re interested in LEED, as long as it doesn’t cost extra.”

LEED v4 and cost uncertainty

With... Read more

Hi all,

BG WebDev needs to clarify the Forum comment moderation rules you would like us to put in place.  We do not require moderation for premium users in our LEEDuser forum unless they include a link in their submitted topic or comment. In this case, we hold the publication of the comment in moderation until we can make sure the link... Read more

Does anyone have a Passive House detailing resource recommendation? Something that is applicable to wood over podium and/or metal framing construction? I have the book below but looking for something more applicable.

Passive House Details: Solutions for High-Performance Design 1st Edition

by Donald B. Corner (Author), Jan C.... Read more