Hi folks,

It was fun going back over all the great conversations we had and pulling them together in this report. Please feel free to share it with anyone--no constraints on that!

Also, we'll have a webinar next Friday based on this report-- March 8 at 2pm eastern:

I'll show the report and share key takeaways from the 12th... Read more

Welcome to the quiz portion of Toxic Chemicals in Buildings: How to Find and Avoid the Worst Offenders (recorded webcast).

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how key health hazards and opportunities for healthier choices vary by product category.
2. List... Read more

Here is a fundamental question regarding measuring operational carbon emissions that I'm sure many of you can clarify for me:  Let's say you are considering design options and you want to know the relative contribution of GWP of adding an additional inch of continuous insulation to the building envelope.  The GWP from embodied carbon will... Read more

Hi all,

Thanks again to those who presented at the AIA Show & Tell! Here are the slides for some of the fascinating presentations we saw. Please do not share the slides outside of the networks unless they are marked “PUBLIC.”

There may be more to come; if you presented but did not yet provide permission for your slides to be... Read more

As with most office furniture, systems furniture can be made from unsustainable materials and use adhesives and finishes that emit formaldehyde or other hazardous compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves furnishings that:

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

The new “Contractor’s Commitment to Sustainable Building Practices" calls on firms to practice green building on the jobsite and beyond. But what has really been accomplished during the program's... Read more

Hello everyone - 

I'm writing today to let you all know that as of this month, I am retiring from SERA, and that I'm going to be beginning a new journey as a consultant/volunteer!

I'm going to continue dedicating my time to policy and advocacy work (focused on decarbonizing the built environment) but now I'll be doing it as a free... Read more

Hi all,

We have a project in New Orleans that needs to meet the GSA Inflation Reduction Act (IRA) requirements and submit EPDs. For our concrete, there is only one manufacturer that meets the requirements and is more than 50 miles away (according to EC3). Does anyone have tips on attempting to talk to local concrete manufacturers about... Read more

Hello Green Gurus,

Here is the information for December's Peer Networks Webinar, Architects in the Blue Zone: The AIA at COP26. We hope you will join us!

Register HERE

Architects in the Blue Zone: The AIA at COP26
Wednesday, December 15th, 2021
4pm - 5pm ET (1pm - 2pm PT)

Description

The American... Read more

Hello! Does anyone know of any general contractors who produce a CSR? Is anyone aware of any general contractors who have an ESG rating? If so, what company is being utilized (i.e. EcoVadis) to get the ESG rating?  

Hi everyone,

We're still working to find the optimal time for the SDLS monthly call. We're now looking at the 4th Tuesday of the month. Please fill out this doodle poll to let us know which of these times work for you.

Thank you!

Jen

Hello! I just joined the SAL group and am thrilled to be a part of this amazing network! I am an architect and an educator and now run my own sustainable consulting practice in the Boston area. Having previously led the sustainability efforts at several of Boston’s large architecture and design firms, I made the exciting (and scary) leap in... Read more

Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

Dear all,

For a specific existing building application, we are looking for a half inch insulating glazing unit, preferably with low-e coating. Based on my research, 5/8" seems to be doable (1/8" glass + 3/8" air gap + 1/8" glass) but I'm yet to find a viable 1/2" solution. Have you come across any on your projects? Thanks for your... Read more

Welcome to the quiz portion of VOCs: Still Here, Still Making Us Sick!

Important: This quiz covers all related articles within this topic. Scroll to the bottom of the article page to find links to all the articles covered by this quiz.

Learning Objectives
Upon completing this course, participants will be able to:


1.... Read more

Hello Green Gurus,

Here's another Peer Networks Webinar for September, Prospects for Sustainable Buildings in Congress. We hope you will join us!

Reminder: This webinar is for Peer Networks members only.

I'm waiting to confirm with the presenters whether this will be recorded. Watch this space for updates!

Register... Read more