Has anyone worked on a WELL project? I have heard that you can expect about 1.5 to twice the effort of LEED coordination but wasn't sure how accurate that was. Any suggestions for determining the possible time commitment of WELL coordination?

Thanks in advance!

Stone was one of humanity’s first building materials and continues to play an important role in today’s green building industry. There are many stones used in the building industry, but the most common ones used for exterior cladding are limestone, granite, marble, slate, and sandstone.

BuildingGreen-Approved Stone and Masonry Cladding... Read more

Hello!

I am working with a state agency who is interested in exploring performance contracting (primarily energy focus, but not necessarily limited to...) and it's been a while since I had heard of others implementing this (GSA, some universities).

Do any of you out there know of current/recent owners executing performance... Read more

Hi, all! We've got amazing editorial plans for our December and January coverage, including Brent's rollout of the Top 10 Green Buiding Products for 2024 and a much-needed update to Wood: What's Good? 

Here's the trouble: we have waaaay too many good ideas about what else to cover. And I super suck at mind reading. So Nadav thought maybe... Read more

Received answers from below questions from NIST Andy Persily

1. Is there a preferred bookends range of CO2 for both “optimal” energy and human performances?

Andy: No

2.Is the ASHRAE ventilation of 1000-1200 ppm average, probably not based on performance, suggesting current ventilation rate is sub-optimal with cognitive... Read more

A new article addressing whether PFAS finishes on upholstery fabric actually work (Spoiler alert - they don't) has been published and can be found here:

https://journals.sagepub.com/doi/10.1177/24723444231159856

This is authored by the fine folks at Green Science Policy, Arlene Blum's group that is the source of the Six Classes of... Read more

Hi all, 

The San Francisco Department of the Environment is hoping to gather info from designers and specifiers about construction surplus materials. Their survey is 8 questions total and not limited to those in the SF area. 

Pasting info below if you have a chance to participate! 

Calling Designers and Specifiers:

... Read more

Hi! Just saw this White House press release stating that federal suppliers will need to report on scope 1 & 2, and relevant scope 3 emissions and climate-related financial risks as well as set science-based emission reduction targets. The cutoff for disclosure requirements is $50m in federal contracts. Curious whether this affects any... Read more

Hi all, hope you're keeping safe and healthy. I'm thinking about protocols to put in place on jobsites related to COVID-19 in addition to our IAQ plans. Wondering if anyone's company has started to layout specific protocols, PPE, etc. and is willing to share.

What got me thinking was this article from Prof. Joe Allen at Harvard about... Read more

Hello everyone! I’m happy to be re-joining the group after a two year hiatus.

Pre-pandemic I got to participate in a few winter summits when I was Sustainability Director at Overland Partners in San Antonio. I’ve recently joined Mahlum Architects in Portland and I’m excited to re-engage in the conversation, this time from the West Coast... Read more

Dear SD Leaders: I'm writing to make sure that you've seen a letter that has been circulating protesting the ‘pro-asbestos’ rule change the EPA is considering.  The letter is soliciting firm signatures/owners (as opposed to individuals).  I encourage you to sign and/or get your firm to sign ASAP. 

Please forward as well to any firm from... Read more

Go to your profile, where you will find the TEAM MANAGEMENT section in the left side bar. Click on Team Members.

You can invite up to 9 more colleagues for a 10-person team to start their Premium Subscriber access through the Team.... Read more

Hi all, 

Thank you again to those of you who attended the Summer 2024 SDL Summit! We had an unforgettable few days of learning from one another, including from our presenters.

The slides for the 5-minute presentations are below, as well as the BuildingGreen slides from the Summit. Please be aware that we have permission from all... Read more

I'm curious who in this group has used ASHRAE Standard 209-2018, Energy Simulation Aided Design for Buildings except Low Rise Residential Buildings?

We've used it internally (minimally) as a reference to help better communicate the goals and activities involved with energy modeling at various phases of design. But it seems like there's... Read more

The sheer number of building product certifications and labels is overwhelming, and even those experienced with green labels can get exhausted trying to figure out which are relevant and which aren’t.

The confusion in the market over green labels can complicate efforts of both manufacturers and design professionals... Read more

Welcome to the quiz portion of Whole-Building Life-Cycle Assessment: Taking the Measure of a Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define key concepts of whole-building LCA.
2. Recognize the inherent flaws, and potential gains, of whole-building LCA... Read more

Welcome to the quiz portion of Building Re-Entry with Arc

Learning Objectives
Upon completing this course, participants will be able to:


1.  Explain the similarities and differences between LEED v4.1 O+M performance metrics and the Arc Re-Entry program.

2.  Understand how Arc Re-Entry contributes to an iterative re-... Read more