We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Peter Yost (at https://building-wright.com/ )  is available to provide building science expertise, trainings, public speaking, building investigations, and more. Learn more

Hi folks,

I know the last thing we all need is another assignment, but I took a look at this survey and it really should be pretty quick. And we've been talking a lot about how we can be better advocates for the things we care about...maybe this is a chance to do that? 

From an email request: 

I am writing on behalf of an... Read more

Hi All,

Has anyone dug into ASHRAE 2016 as part of the new v4.1 requirements or as codes start to adopt it? I recently presented on this and thought I should check my math to make sure I'm understanding and communicating this correctly.

My understanding is that there is a new reference baseline, that is essentially the ASHRAE 2004... Read more

There are a variety of products and practices that contribute to environmentally friendly landscaping.

BuildingGreen-Approved Landscaping Products
Edging

BuildingGreen approves products with recycled content or other environmental benefits.

Erosion Protection

Natural-fiber erosion protection options include... Read more

hi all! I'm almost at the finish line with this year's 2030 reporting...whew. I'm running into an issue that I wanted to throw out to this group, regarding the zero tool and national average baselines. Hoping some of y'all who manage your firm's 2030 data, or are just more familiar with CBECS and related data, have some insight / experience to... Read more

As part of the Philadelphia AIA COTE, we have been proposing implementing sustainability in some fashion into the design awards with our chapter's design committee.  I know that many of you have been down this road before, and wanted to get your feedback at a high level about what your local COTE is doing.  Anyone who's interested, can you... Read more

Lisa Richmond

Hello all,

This month's SCDL call was full of great discussion! We decided this month that we are feeling good about where we are for the Task Force Agreement on defining social sustainabiltiy in our work. The aim is to work with this agreement for a while and see if it holds up as a process framework. There was also interest to invite... Read more

Welcome to this practice session for the LEED AP v4 exam, and good luck!

All the exam questions and explanations that follow were authored by Alex Spilger, LEED AP BD+C of GreenStep Education, and are provided in this BuildingGreen "exam simulator" through a special partnership with GreenStep and with our friends at the Poplar Network.... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

This one-hour crash course will review the concepts and key facts within the WELL Building Standard that are covered most extensively on the WELL AP exam. By... Read more

Good morning, All,

Just a bit of news this morning.  My family and I are moving back out west!  I am continuing in my current role with EwingCole, but will be doing so from Portland, Oregon.  Although North Carolina has a been a wonderful place for us for the past 13 years, it is time to be close to family in the northwest and southwest... Read more

Hey Peer Network! Curious, if we can crowd-source a solution here for the pervious pavers at our Omaha office (climate zone 5A). Apparently over the years we've tried to add different kinds of fill here (gravel) but it keeps... disappearing. Any recommendations with either a replacement product or fill item? 

Hi Everyone, 

Has anyone had success in finding organizations or programs that will recycle the hard hats? We are looking into options for recycling our expired hard hats that can no longer be used. Ideally, we would want to use a company with facilities across the country but we are open to any suggestions or ideas you all may have.... Read more

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Thank you for subscribing!

You’re about to start getting free updates on key news and intelligence you need to succeed and do your best work in the green building industry. We’ll also share special opportunities to get our premium content.

Continue to BuildingGreen »

Continue to LEEDuser »

Hello, All,

Does anyone have experience with cove.tool (https://covetool.com/)?  Perhaps for those projects that may not get fully modeled, or as a tool to help set baselines?  It came across our radar recently, and I'm wondering if the subscription might be worth a try.

Thanks! 

Maria