Caseworks can be made from unsustainable wood and other materials, and with adhesives and finishes that offgas formaldehyde and other hazardous compounds.

BuildingGreen-Approved Casework

Approved caseworks are:

Hi Advising Leaders!

Lets get this forum going by introducing ourselves (yes, I know we mostly know each other, but just to be sure). And sharing what's most exciting and/or bugging us these days. Oh, and if you haven't already, please fill out your BG.com profile with a picture and bio. 

I'll start. I'm Nadav, president at... Read more

Does anyone have language from an RFP that had specific performance criteria included that they could share? Such as a specific EUI target, detailed language about net zero, passive house, etc.

Dear SLD-ers,

We have a project team considering the use of copper cladding for a high profile project in Vancouver. The preference is to use pure copper that is pre-patinated and does not have additional coatings.

We are attending a CEU from the Copper Development Association to understand options and environmental impact, but we... Read more

Welcome to the quiz portion of LEED vs. Green Globes: A Definitive Analysis

Note: If you are taking this quiz as a member of LEEDuser, please take the quiz here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Highlight the most significant differences between LEED and Green... Read more

Does anyone know of studies that measure for any correlation between the prevalence of collaborative people in leadership positions with financial (or other) success for firms/organizations?

There have been well-publicized studies on how companies with women in leadership positions, and companies with more diversity, do better. (... Read more

Greetings Gurus!! I'm super excited to invite you all to help each other :)

As many of you know, BuildingEase (a completely free tool!) has been born this year, the newest function we just launched is the Crowdsourcing function.

Crowdsourcing lets anyone contribute products to a public Material List (similar to an Outline Spec)... Read more

hi all! I'm almost at the finish line with this year's 2030 reporting...whew. I'm running into an issue that I wanted to throw out to this group, regarding the zero tool and national average baselines. Hoping some of y'all who manage your firm's 2030 data, or are just more familiar with CBECS and related data, have some insight / experience to... Read more

Welcome to the quiz portion of Deep Dive into the Integrative Process with Marcus Sheffer (recorded webinar)

Learning Objectives
Upon completing this course, participants will be able to:


Hi folks,

No details have been sorted out yet, but I wanted everyone to have a heads-up that the SCL Steering Group is proposing that we graduate to a full, stand-alone SCL Summit in 2020. (Until now we’ve been squeezing our Summit into the day before Greenbuild, which is good in some ways, but problematic in others—and limits our time... Read more

Hi SD Leader: Please review, consider or pass along this terrific new position leading the Sustainability strategic direction at the Washington University School of Medicine. WashU has an ambitious sustainability leader role regionally and across the nation and the School of Medicine (highly ranked nationally) plays a big role in that. The job... Read more

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

As if you weren't worrying enough already, here's a little something that I ran across through monitoring activity on the American Society of Healthcare Engineers discussion boards:  https://www.id-hub.com/2018/10/17/hospital-plumbing-reservoir-resistance-interview-amy-mathers/, "Hospital Plumbing as a Reservoir for Resistance".  This is both a... Read more

Hi SD Leaders,

As you may be aware, this past April a group of manufacturers calling themselves the Living Product 50 responded to the letters that many of us sent about five years ago advocating for transparency in their product ingredients.  A copy of that letter can be reviewed about midway through the page at this link:  https://... Read more