Related to some recent questions on site-specific sun/wind analysis and early energy modeling tools, are there any tools that account for nearby topography (like bluffs) or large buildings/vegetation in energy calculations? Or favorite methods to estimate its impact particularly during early massing studies?

Thanks,

Rachel

Plug loads—the energy consumed by plugged-in devices—can use a substantial amount of the total energy in both residential and commercial buildings.

BuildingGreen-Approved Controls

BuildingGreen approves products that monitor and reduce electricity use for plugged-in electrical devices.

Plug Loads and Energy Conservation... Read more

Hi Everyone, just as governors are regionally deciding how to reopen their economies, it's probably time we started thinking about what getting back to work looks like for us.  And, just as governors are leaning on each other for ideas and coordination, we can benefit from discussing strategies as a group.  To that end, I wanted to get your... Read more

Southface will need a procedure for adding and assigning SMEs to the BITuser site. Normally you could just create the user in BITuser and assign the role right there, but we have the added complication of Salesforce SSO, which means the sequence will have a few extra steps.

Here's the basic outline:

We have several projects that are small enough that we don't hire consultants to run energy models. I just received permission to do some training so that I can run these models myself. I am looking at doing this training on eQuest:

https://www.udemy.com/course/equest-energy-modelling-detailedtraining/?c...

I am thinking it would... Read more

Welcome to the quiz portion of Video: Energy Reporting in LEED with MPR6.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define the role of MPRs in achieving LEED certification
2. Describe MPR6 and the pathways for achievement
3. Answer MPR6 Frequently Asked Questions... Read more

Greetings, colleagues!

Here's an opportunity for this community from AIA COTE Advocacy: US Congressman Paul Tonko (D-NY), Ranking Member of the Environment Subcommittee of the House Committee on Energy and Commerce, is looking for input from national stakeholder groups to help develop new federal climate legislation. Congressman Tonko... Read more

What is the lag time for historical embodied carbon data catching up with real-time information as manufacturers source renewable energy? Is our professional time best spent calculating with out-of-date information or more simply calling for manufacturers' elimination of fossil fuel combustion in their production and transportation of materials... Read more

Hi,

I have a colleague doing research on PCM in several projects. For context in their report, they were wondering if this group has seen any recent increase in application of PCMs in recent years. Is it just in ceilings or other applications? If so, what products are being used? They were having difficulty finding manufacturers other... Read more

Hi folks! Our AIA Seattle Committee on the Environment is hosting a series of decarbonization talks that might be of interest to this group. The next one is coming up next Thursday with the University of Washington. 

Details and free registration here: https://aiaseattle.org/event/cote-university-of-washingtons-pathway-to-d...

test

Hi all, curious if anyone is involved with development / advocacy for the new MA stretch code? https://www.mass.gov/info-details/stretch-energy-code-development-2022 

My firm recently added a Boston location & I'm slowly getting to know the green building world there - would love to know if anyone is organizing public comments on the... Read more

Following up something I mentioned at the summit - the EPA is hosting public comment webinars related to the IRA and construction. The first one seems particularly relevant, 3/2/23 from 2-3.30pm EST “Reducing Embodied GHG Emissions: Construction Materials Prioritization and Environmental Data Improvement”. Good opportunity to have our voices... Read more

In order to successfully contribute to a LEED project, it is important to have an understanding of how the LEED process integrates within a typical design and construction schedule. Every new construction or renovation project, whether large or small, moves through certain project phases beginning with design development, design completion (... Read more

Colleagues,

As we all know, ventilation rates must be kept the same between the LEED Baseline and proposed energy models. However, we're aware of projects that have been able to claim energy savings associated to reducing ventilation using systems like Aircuity. 

Have any of you successfully claimed credit for reduced airflow due... Read more

Hello all,

We are having a mini office debate on fiberglass vs aluminum windows for use in schools (k-12) in Massachusetts. In the past we have always used aluminum windows on our schools, for durability. However, their performance is not as great as other products that are up and coming on the market. There is some hesitation to switch... Read more

Recycled plastic paneling is an appropriate use for some of the various post-consumer plastic materials entering the waste stream—in particular, high-density polyethylene (HDPE) from milk and detergent bottles.

BuildingGreen-Approved Panels

BuildingGreen approves plastic paneling products with high recycled content—in some cases... Read more

Hi folks,

Has your firm:

- hired a consultant to conduct firmwide bias training?

- revamped its hiring process using an antiracist lens?

- developed coaching circles / reading groups around racism/anti-racism? 

- instituted new support structures for staff development around inclusivity?

- some other... Read more