News Brief
A campus for the new Dreamworks Studio at Playa Vista, formed last year by Steven Spielberg, Jeffrey Katzenberg, and David Geffen, will soon be under construction. Environmental consultant John Picard of E Squared is responsible for bringing an ecological design awareness to the project and coordinating design of the communications systems for... Read more
News Analysis
The distinction of being the first government body to officially adopt a straw-bale construction code goes to the Napa County (California) Board of Supervisors. The Board adopted the voluntary guidelines in California’s new law, based on Assembly Bill 1314. The guidelines still require an engineer’s stamp on all plans, however, as does every... Read more
News Brief
Real Goods’ new “Solar Living Center” in Hopland, California will demonstrate the philosophies of energy independence and living in harmony with nature that the company preaches. Real Goods hired Sym Van der Ryn’s... Read more
News Analysis
A workshop on the linking and prioritizing of environmental criteria in building assessments was held this past November in Toronto. Workshop organizers had hoped that the participants would help figure out ways to prioritize environmental criteria so that practitioners in the building industry can focus the most energy and attention where they... Read more
Product Review
Cork has been used as a flooring material for more than one hundred years. Cork flooring is durable, it provides acoustical and thermal insulation, it cushions the foot, it is resistant to moisture damage and decay, it is fairly easy to clean, and it is harvested from trees in a sustainable manner. Though imported and thus energy-intensive to... Read more
News Brief
At a workshop sponsored by Environment Canada’s Winnipeg, Manitoba office, participants decided to establish the Used Building Materials Association as a networking forum and common voice for the salvage and reuse industry. With a core group of twelve American and Canadian nonprofit and for-profit salvage and reuse organizations, the... Read more
Op-Ed
Thanks for your article on “Establishing Priorities.”
Under saving energy, the first item: “In buildings with skin dominated loads,” incorporate high R-values. What about buildings with greater internal loads? Does it follow to use less insulation? Make it less airtight? I have a high school where the general contractor is saying, “How come... Read moreFeature
If our goal is to reduce the overall environmental impact of our building projects, we must begin paying more attention to the role automobiles play in these projects. Even the most environmentally responsible house—for example, an energy-independent, passive-solar house, built of salvaged and recycled materials, with graywater separation—will... Read more
News Analysis
How can we be confident that a particular manufacturer or company is committed to environmental improvements? There are certification systems for specific environmental claims, or for particular products, but as the best management practices and environmental goals evolve, how do we know that the... Read more
Product Review
... Read more
News Brief
Environmental Committee, Denver Chapter, AIA, and Colorado Chapter, ADPSR. 1995. Loose-leaf (without binder) or diskette (PC or Macintosh), $29.95. Order from: AIA Denver/SDRG, 1562 15th Street, Denver, CO, 80202; 303/446-2266, 303/446-0066 (fax).
Greatly improved from last year’s first edition, this... Read more
News Brief
The Woodworker’s Alliance for Rainforest Protection (WARP), a leading promoter of lesser-known species and other lumber from environmentally preferable sources, is changing its name to the “Good Wood Alliance.” Reasons for the change included a recognition that the environmental issues addressed are not limited to rainforests and that not all... Read more
Product Review
For years polystyrene has been just about the only game in town for exterior foundation insulation. The problem is that
extruded polystyrene—the type of polystyrene most commonly used on foundations—is produced with HCFCs that deplete ozone, and
all polystyrene (both extruded and... Read more
News Brief
The Rainforest Action Network (RAN) has a new “Wood Reduction Clearinghouse” to disseminate information on ways to reduce waste and find environmentally sound alternatives to wood. Reducing wood use in construction is a primary goal of the service. Contact Dana Harmon at RAN, 450 Sansome Suite 700, San Francisco, CA 94111; 415/398-4404, 415/... Read more
News Brief
Steven Winter Associates, Inc., of Norwalk, Connecticut, has been awarded a grant through the U.S. Department of Energy’s 1995 Small Business Innovative Research program to design advanced modular townhouses for urban infill sites. The company has been charged with designing townhouses that employ renewable energy and energy conservation... Read more
Op-Ed
I very much appreciate your recognition of the need for and efforts to identify priorities for “green building” (whatever that is). Such priorities can either be defined implicitly by the buildings a “green designer” creates or by some systematic process based on a hierarchy of environmental problems. Your... Read more
News Analysis
Choosing an environmentally friendly siding material has never been easy. Often the more “natural” products, such as wood clapboards, are associated with depletion of sensitive forest resources, while materials that are highly manufactured—such as vinyl—raise questions about chlorine and petrochemicals as... Read more
News Brief
Environmental Building Consultants, 312 A Jefferson Ave., Cheltenham, PA 19012-2021; 215/663-1611, 215/663-1637 (fax), ehouse@omni.voicenet.com (e-mail); $50 for PC or Macintosh diskette containing database and software to run it.
This initial release of an IAQ products database contains about 450 listings... Read more
News Brief
Building Industry Professionals for Environmental Responsibility (BIPER) is a new lobbying group founded to counter the frequently anti-environmental message governments receive from mainstream industry organizations. Annual membership is $35. Three levels of membership allow members to choose the frequency of contacts from the... Read more
Explainer
now being manufactured in Perrytown, Texas, can be used in place of both framing and drywall in partition walls. At $19 each for 4’ by 8’ (1200 mm by 2400 mm) panels, they are very competitive with conventional stud framing within a reasonable shipping distance from the plant. The panels... Read more

