Hi everyone, it was so great to meet some of you at the winter summit and finally connect names with faces!

We have a project that is targeting CalGreen Tier 2 and LEEDv4 Platinum.  Thought I'd reach out to see if anyone on this forum has found comparison guides between the two?  Looking for something similar to this CalGreen 2013 tier... Read more

Welcome to the quiz portion of Video: Making the Green Insulation Choice for Your Project.

Learning Objectives
Upon completing this course, participants will be able to:


1. Discuss how insulation works.
2. Explain why certain materials make more sense than others in particular applications.
3. Summarize... Read more

Auto-quiz used for CEUs for attendees of the 2023 SDL Winter Summit.

Hello Green Gurus,

Here is the information for this month's Peer Networks Webinar, Adapting the Construction Process for Passive House. We hope you will join us!

Register HERE.

Adapting the Construction Process for Passive House
Wednesday, April 28th, 2021
2pm - 3pm ET (11am - 12pm PT)

Description
... Read more

Guiding questions:

Hello Green Gurus!

Quick introduction as this is my first time posting - Louis Koehl, AIA, CPHD, Director of Sustainable Design at Handel Architects, based in NY. I recently joined the SDL Forum and met some of you at the regional summit and Greenbuild.  I'm excited to continue to connect with such an influential group! 

My... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Team,

You probably know on July 9th, WHO issued a document and agreed aerosol route of COVID-19 transmission is possible, but fell short of saying we need to make provisions in our buildings for it per the "Do no harm" principle.  Mary Ann Lazarus, Pauline Souza, Kay Sargent, Joyce Lee, and I (SDL members from architecture and... Read more

Has anyone heard of floating solar technology? I can't think of an application other than covering power plant retention or agricultural waste lagoons. Covering up the sun on a natural body of water and adding electrical wiring seems like a bad idea. I am curious though if others have heard of this technology and have other (unbiased) ideas... Read more

I am working on a new community development in St. Paul that is striving to achieve net-zero energy. We are able to get there mathematically by using the extra generation on light industrial rooftops to offset medium-density housing energy use (all buildings are anticipated to have different, private owners). However, this puts us over... Read more

I read a very misleading article on the AIA's website today regarding antimicrobials and the benefit of microbicidals in paint. It was written by a manufacturer, not a healthcare professional, and was not obviously labeled as sponsored content on the website. (I received the link in an email, which did label it as such).

https://www.aia.... Read more

Hi everyone - I will be holding my breath and attending the AIA conference in person this June. Is anyone else going? I'd love to reconnect with each of you!

Apologies if I've missed it - with there be a BuildingGreen meetup?

Feel free to email me if you don't want to reply all - kanderson@lmnarchitects.com

-Kjell

Hello All-

  We have a K-12 school project that is using a R-60 flat roof assembly as an energy & costing benchmark (along with other energy efficiency measures but this is the relevant detail to our question).  The project mechanical engineer is not onboard with a number of our energy conservation measures and has been sharing... Read more

Hi all,

Here's a good follow up to Maria's steel question on Monday.  We have a Midwest project that unfortunately (from a carbon perspective) is required to use a traditional, thick precast facade.  We’re working with the contractor and potential future (not yet bid out) fabricators to determine an appropriate % of pozzolanic material... Read more

Welcome to the quiz portion of What Makes the Building Envelope Green? BuildingGreen’s Guide to Thermal & Moisture Protection Products.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe attributes of the greenest building envelope products.
2. Explain how to... Read more

I'm passing on an alarming (and truly Orwellian!) message from the AIA that some may have received:

The AIA is aware (and has been actively addressing) that there is a draft executive order circulating for consideration by White House officials that would officially designate “classical” architecture as the preferred style for the... Read more

Welcome to the quiz portion of Building Electrification: A Vital Solution to Climate Change.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Understand the relationship between building electrification and decarbonization to improve the efficiency and sustainability of buildings.

2... Read more

This are opportunities for us to get involved as design and construction allies with the new administration and the US Department of Energy on more efficient building.

The first link below is for low-carbon projects that will provide the case studies and solutions that the industry can follow.  The second is identifying barriers and... Read more