On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Hi everyone! I'm extremely pleased to be back in this group after a couple of years out and I'll spare no time in spamming your inboxes. 

MASS is working with UT Austin to help them evaluate their campus buildings for reuse firstly and then deconstruction and material reuse. Their campus, as with most campuses, is constantly being built... Read more

All,

I'm looking for a quick methodology to estimate GHG emissions from refrigerants on a per SF basis. Are there any benchmark studies or quick calculators similar to the embodied carbon study? https://carbonleadershipforum.org/embodied-carbon-benchmark-study-1/

Thanks,

Josh

I've been seeing Armstrong's DC flexzone ceiling system at Greenbuild for many years. I'm working on a net zero project with LED lights and solar panels. In theory, the transmission losses in going from DC power from panels to AC for the building to DC for the lights would be eliminated. But does anyone actually have experience using this... Read more

Hey all,

We have a NAVFAC project going into construction that has indicated that they'd like to hire someone to help them with the construction tracking aspects of the UFC requirements, including the Guiding Principles Assessment (GPA) program through GBCI. We're on the design side, so cannot offer these services on our own project;... Read more

Welcome to the quiz portion of Know Thy Client: 9 Un-Green Strategies for Delivering Better Buildings

Learning Objectives
Upon completing this course, participants will be able to:


1. Focus on a client’s values to drive sustainability solutions.
2. Define the quality of the work being delivered to underscore... Read more

Hi Green Gurus,

We're off to a great start with First Friday Fikas* this year. We've had good turnout and lots of fun. This new tradition continues this Friday at 11:00 am Eastern Time (8:00 am Pacific). We have more fun planned, with prompts to help us get to know each other.

If you registered previously you can use that same... Read more

Building materials emit massive amounts of carbon long before the lights go on.

In this course, BuildingGreen takes an analytical look at the greenhouse gases that are emitted in the process of constructing our buildings in the first place—the embodied carbon. The report focuses on how architects and designers, working with other key... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Why high-performance assemblies? And why now? Today we demand better thermal performance from our building assemblies than ever. But higher performance... Read more

All,

My team at WSP has a pretty awesome senior position available and I wanted to bring it the group's attention as we try to get the word out. The role is to lead our Sustainable Design Analytics group (part of our Built Ecology team), ideally based in CA or NYC, but open to wherever good candidates may be. If anyone knows someone that... Read more

Dennis,

I was wondering if you have any previous experience implementing SSO authentication with Salesforce before and if you had any pointers. This morning I created a developer account on Salesforce and enabled it as an identity provider and am in the process of trying to get Drupal to act as the service provider. The Salesforce... Read more

Hi, and welcome to the Sustainable MEP Leaders Peer Network! 

This online forum is one of the ways we can stay connected and support each other as we collaborate to help MEP design achieve its highest potential as an element of sustainable and regenerative buildings. Please introduce yourself with a little about where you work, what you'... Read more

Hello all,

We are looking at ways we can use our specs to reduce toxicity in projects and one step towards that goal may be to require RoHS compliant lighting, switches, alarms, meters, etc., as required by the Small Electrical Components exception in the Living Building Challenge. Based on LBC projects I have been involved with, it... Read more

Fluid-applied roofing materials can be added to an existing roof to extend its life and provide reflective characteristics.

BuildingGreen-Approved Roofing

Products listed by BuildingGreen have VOC levels below 50 g/l and reflective surfaces to reduce heat gain.

Energy Star requires initial reflectance of 0.65 for low slopes... Read more

So every year about this time I get to spend many lovely moments with our AIA 2030 Reporting data. In order to make the data useful the CBECS baselines/National baselines aren't great in telling us how we did.

For about half our 15 projects that we report in the average year - performing arts, convention, data science schools, etc - a... Read more

Some of you are aware of my ongoing saga of off-site renewable energy and a LEED certification we are pursuing. The short version is that there is a new-construction corporate headquarters office building (Building #2 on the attached graphic). This building is pursuing LEED certification. 

The company also just installed a 1 MW... Read more