Hey gang,

We're working on a project that's currently designed as mass timber. We're up against some cost control efforts (of course) and the CM/Client is asking about changing some of the building to steel or green steel. We set out with a goal on the project that within the core and shell, Module A GWP emissions will be net zero.... Read more

For questions and/or to be added to the Summer Summit waiting list, please email Jerelyn Wilson directly.

2019 Summer SDL Summit
Islandwood, Bainbridge Island, WA
July 31st- August 2nd, 2019

Does anyone have language from an RFP that had specific performance criteria included that they could share? Such as a specific EUI target, detailed language about net zero, passive house, etc.

Hello Green Gurus,

Here are all the details about our Peer Network event in NYC on Wednesday, September 28th. If you'll be in town, we hope to see you!

From 1-5pm we'll have the NYC Regional Mini-Summit, open to members of any of the five Peer Networks (Sustainability Consultants, Community Design Leaders, Contractors, Architects... Read more

Welcome to the quiz portion of Finding Products for LEED v4—A Guide

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe ways in which the LCA approach is gaining ground in LEED v4 and how the transition is reinforced by manufacturer transparency and disclosure.
2.... Read more

I came across these open roles recently on Gensler's career page. Sharing them here if there is any interest in this group. As I understand it, though the roles listed are in NYC and NJ, they would be OK if the person reported to one of the following offices: NYC, Morristown, Boston or Toronto.

Sustainability Specialist – NJ: https://... Read more

Dear SLD-ers,

We have a project team considering the use of copper cladding for a high profile project in Vancouver. The preference is to use pure copper that is pre-patinated and does not have additional coatings.

We are attending a CEU from the Copper Development Association to understand options and environmental impact, but we... Read more

"The man with one watch knows what time it is; the man with two is never sure."   --Segal's Law

We recently purchased two indoor air quality meters in the $200-$300 range and find that they never agree, not even close. I would like to find out what other people's experiences have been, and if they have tested affordable models that... Read more

Hi Advising Leaders!

Lets get this forum going by introducing ourselves (yes, I know we mostly know each other, but just to be sure). And sharing what's most exciting and/or bugging us these days. Oh, and if you haven't already, please fill out your BG.com profile with a picture and bio. 

I'll start. I'm Nadav, president at... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Concrete is one of the construction industry’s largest carbon emitters, responsible for about 5% to 8% of the world’s anthropogenic greenhouse gas emissions, yet it is also one of the most important building materials.

There are well-proven ways to reduce... Read more

Hi all, has anyone come across a comprehensive (and recent) study looking at how long buildings actually last (beyond Stewart Brand)? I know of plenty that look at the benefits of reuse, but none that look at existing building stock and how much has been reused vs. demolished. 

As we start looking at embodied carbon metrics, I can't help... Read more

Hi everyone!
I've seen a lot of claims over the years of living walls or planted buffers that can mitigate *outdoor* air pollution and have always assumed there's no real scientific basis for that idea, unless we're talking an actual forest that's 10s of feet thick. Am I wrong? Are there examples of living walls that actually have been... Read more

consider supporting Varun Kohli for AIA Board At-Large seat

If you are a voting delegate for the AIA, please consider casting a vote for my friend and COTE colleague, Varun Kohli, FAIA; he's running for the At-Large seat on the AIA national Board of Directors.

Varun is a former COTE Leadership Group member and he understands... Read more

Hello Everybody,

I would like to invite you all to an event being hosted by the AIA Seattle COTE.  This is the next event in a series entitled Pathways to Decarbonization.  Date and time: May 13, 12:00pm - 1:00pm 

Description:  Universities are learning laboratories to explore and implement solutions to our greatest challenges... Read more

Split systems are multi-component units that use an outdoor condenser along with separate indoor fan coils to move refrigerant—and provide heating and cooling—in buildings without the need for ducts.

BuildingGreen-Approved Systems

BuildingGreen approves mini-splits that are tested to AHRI standards and have minimum SEER and an... Read more

As if you weren't worrying enough already, here's a little something that I ran across through monitoring activity on the American Society of Healthcare Engineers discussion boards:  https://www.id-hub.com/2018/10/17/hospital-plumbing-reservoir-resistance-interview-amy-mathers/, "Hospital Plumbing as a Reservoir for Resistance".  This is both a... Read more

Ace Brockwell

I am the Moderator of the 2023 Strategic Council and the call for nominations for the 2024-2026 Strategic Council at-large representatives has just been released.  I would encourage any interested parties to apply for this position.

The Strategic Council’s purpose is to develop ideas to inform future needs and opportunities for the... Read more

Based on current projects, pursuits, and ongoing thought leadership, the following are hot topics across the Stantec Buildings group.

Read on to stay up to date with evolving skills and expertise not only in your own BC but also... Read more