For those of you that attended Greenbuild this year you may have heard about the Legacy project taken on by the USGBCMA Chapter. The winning project was The Green Building Tech Club at Madison Park Technical Vocational High School. The USGBCMA Chapter recently reached out to me and asked if Structure Tone would take on an intern this summer,... Read more

Hello Community!

I often get asked about the application cases of annual vs. marginal emissions. Are you aware of an ASHRAE standard or journal article that concisely describes the use case for different CO2 eq. metrics? Has anyone reviewed ASHRAE Standard 240P: Evaluating Greenhouse Gas (GHG) and Carbon Emissions in Building Design,... Read more

All,

I'm sure a few of you attended our recent  webinar on the LEED v4.1 LCA webinar. In case you missed it, the recording is posted. We were stunned by the amount of engagement from the audience; we allotted 30 minutes for questions and I think it went even longer. The webinar recording should be a great starting point for anyone... Read more

Wood decking requires potentially hazardous preservatives and stains, and plastic waste is a significant environmental problem.

BuildingGreen-Approved Decking

Composite decking approved by BuildingGreen has at least 50% total recycled content. For plastic decking, post-consumer content has to be greater than 50%.

Health and... Read more

Hello friends,

Anyone who will be attending NESEA's BuildingEnergy Boston conference next week is invited to an informal Green Gurus meetup! Stop by the Built Environment Plus booth (#4 on the map) at 6pm Monday (during the second half of the trade show reception) to say hi to some fellow Sustainability Leaders. SDL member Keihly Moore... Read more

Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

I give you... the content-ready site. The editors should be able to start adding Best Practice content.

Development site: 
https://live-bituser.pantheonsite.io/

Instructions (with tutorial videos):
https://docs.google.com/document/d/1EUIzitkW0CczFQo8V2q3gVDVO4Juk4EI9iv8...

I created accounts for all the editors... Read more

Welcome to the quiz portion of The Four Core Issues to Tackle for Resilient Design (And the Programs That Can Help).

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Use site-specific hazard analysis to evaluate a project’s resiliency demands.
2. Use climate change data to... Read more

Hello Colleagues,

You all know our industry’s progress over the past decade related to the impact of materials. We have come a long way. Today we have over 110 firms that have signed onto the A&D Materials Pledge, pledging to a holistic approach to materials considering: Human Health, Climate Health, Ecosystem Health, Social Health... Read more

EDITED LINK

Hello, below is a link to our newly uploaded research report, Embodied Carbon in Commercial Furniture. This new research report introduces a case study and some new baselines for measuring the carbon footprint of commercial furniture, to add to a growing body of work on this topic among our peers:
Embodied Carbon in... Read more

Thank you BuildingGreen for yesterday's fun news and much needed chuckles.  I really appreciated the GOOP article the most! I mean, dare I say, a kegel powered elevator - absolutely brilliant!

If you have not seen the April Fool's edition, take a look at the talent and time that was put into these stories.

https://www.... Read more

Hello,

We are in the very early planning phase of a k-8 public school project to be designed and built in an economically challenged urban location with very limited site options. The project is not LEEDv4 registered yet.  We are at feasibility and costing the soil remediation, needless to say that we would really hope there would be... Read more

We are cautiously rekindling the age-old debate: how are we balancing modeling software for design /visualization and performance analysis during early phase of design.  

We are heavy SketchUp users for early design, and most of our staff have access to COVE tool for early performance analysis. Problem is, I’d rather use Revit to COVE... Read more

Does anyone have a recommendation for software that helps organize and track product and material selections for projects? 

Thanks!

Welcome to the quiz portion of The Value of Variability.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Understand why variability is important to the comfort and well-being of building occupants.

2.  Define “alliesthesia” and explain how it relates to the well-being of occupants... Read more

Friends,

This is a personal note. My son was just diagnosed with Asthma. I’m started to wonder if it’s just coincidence that this corresponded with him starting kindergarten in a school where they clean with Chlorine bleach. I found substitutes for his small preschool and at home.  My understanding is that there’... Read more

Hi all,

For your planning purposes for next year, here’s info on an in-person event coming up in 2024:

We are excited to announce that we will be hosting an all-peer-networks workshop for SMEPL, SDL, and SCL members at Miller Hull’s office in Seattle on July 15, 2024. We’re still working out the details, but given the recent... Read more

Hi Everyone!

Here is your friendly reminder for the last call to submit your Salary Survey! Here is a PDF to collect your thoughts first if that is helpful.

*This survey will be closed end of day Friday Feb. 15th.*

Important Note: There is a link to a Google Form at the end of the survey to let us know you have completed... Read more