Hey SDL,

I'm curious if anybody out there has developed specification language requiring a certain level of airtightness (as assessed via one or a series of blower door tests) for a commercial project when it is not going for a Passive House certification and a blower door test is not required by code--basically, something in the... Read more

Love books? Want some inspiration? Join this Goodreads group with the following link... 

https://www.goodreads.com/group/invite/873351-green-gurus-goodreads-grou... (this link will be active for 30 days so let me know if you get here late and need it again)

I set this up as "private" so I will need to approve you. Anyone will be... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Welcome to the quiz portion of Rebuilding for Resilience in the Face of Natural Disasters!

IMPORTANT: This quiz covers three related articles within this topic. 

Learning Objectives
Upon completing this course, participants will be able to:


Trista Little, Erika Duran, and Paula Melton

Thanks to SERA especially David, Kira and Clark for an inspirational conversation with Paul Hawken about his latest book. I know I needed a positive perspective! Then I found this great "Regeneration Anthem" song and had to share.

https://regeneration.org/news/210915-we-can-change-world-regeneration-an...

Happy Fall to all.

Hi All,

Has anyone dug into ASHRAE 2016 as part of the new v4.1 requirements or as codes start to adopt it? I recently presented on this and thought I should check my math to make sure I'm understanding and communicating this correctly.

My understanding is that there is a new reference baseline, that is essentially the ASHRAE 2004... Read more

A brief non-technical rant about OneClick LCA - from someone who is not actually USING the tool, but lobbying for its access.  Wondering if you all have better intel, or if it is just me.

We are working on a number of projects for which te teams are using OneClick LCA - for some cases it has a better international data set than others. ... Read more

Happy Thursday, all!

I will be presenting with my colleague, Emily Hoffman, and our counterpart from Seattle, Duane Jonlin, on how firms can contribute more to aggressive energy and carbon targets, from the perspective of three people that see thousands of projects each year.  We see the best and the worst, and we're convinced that our... Read more

All,

I recently met Sahil Tadwalkar who is a Stanford MS Candidate in Civil Engineering. He and his group are interviewing design and construction industry professionals to understand issues and challenges around specifying and using low carbon solutions on projects. Interesting stuff! I encourage you to contribute by setting up an... Read more

Congrats Nadav!!!! https://www.aia.org/showcases/181011-nadav-malin-hon-aia?utm_source=Buil...

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more