Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Hello!

I'm curious what other firms like to use to run site-specific sun path and wind path analysises that is relatively intuitive to use and generates good graphics. We have used the climate consultant software for wind roses which is free and simple. We've also used sefaira but we're hoping to crowd source more resources. We purchased... Read more

Greetings, Green Gurus:

As unbelievable as it sounds, the Environmental PROTECTION Agency has launched a PR blitz in support of their "new use rule" on asbestos. So the BuildingGreen community needs to push back harder. I'm reposting the links to the letter of opposition that Mary Ann Lazarus put up last week. We definitely need more... Read more

Hello everyone,

So sorry that some of you couldn't get onto the call on Tuesday! There was a bit of a problem with our Zoom links. I think we've figured it out, so we should be all set next time.

Here are the notes from the call. If you have any questions about something on there, please feel free to post them here and we'll try... Read more

Hi gurus,

Do any of you have preferred portable devices for indoor air quality monitoring? I know it's hard to find apples to apples, but ideally temperature, CO2, VOC, PM2.5, PM5 would be on the list. Mid-level accuracy - better than consumer, not as $ as IAQ professional level. Thanks!

Colleagues

It has been my great pleasure to serve the AIA's COTE Top Ten review process, both as a main juror and, most recently, as one of the technical review team.  I have specifically reviewed the Discovery and Energy measures for the past few years.  I will be serving again on the 2021 team.  The AIA has already received many more... Read more

The Sustainable Design Leaders peer group brings together the most committed sustainable design directors from leading architecture firms throughout the U.S. and Canada. We invite you to apply for membership.
We look for the... Read more

Welcome to the quiz portion of Biobased Materials: Not Always Greener.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain why "biobased" is too general a term.
2. List the primary concerns associated with biobased building materials, finishes and furnishings, and wet-... Read more

All,

The Idaho Division of Occupational and Professional Licenses (DOPL) has undertaken the Zero-Based-Rulemaking process this year to eliminate all requirements that are not specifically life-safety related.  As such, they have proposed removing the International Energy Conservation Code (IECC) 2018 provisions regarding commissioning... Read more

There is a ton of stuff being posted about this, so this is definitely an area where it's nice to have had someone going through it and selecting the best. Thanks for doing that, Jen!

- These tips from 350.org have a great focus on connecting people and using different techniques. Their sample retreat shows how some of it might look in... Read more

Hey, everyone! Eleven months after our initial release, we have now released a totally updated version of our EPIC tool. It’s available at the same location as before (https://epic.ehdd.com) and reflects thousands of hours of work over the last year. From humble beginnings in Excel, EPIC now has about 2,000 users and dozens of logins each day—... Read more

Hello fellow SD leaders,

This is a quick note to re-introduce myself to this group. I am a lapsed member from the original tribe of 2008 who has found my way back on a trail of bread crumbs left by Nadav (thanks Nadav!). I'm just glad to be back amongst my people, sharing and learning from you all, as we help each other to get where we... Read more

Building Green Peer Networks meet up @ Living Future 24

WEDNESDAY 8 May 7-830pm at Park Bar, 150 Walton, Atlanta

See you there!
 

Team,

As you all probably saw, Boston is discussing using both CEI (carbon emission intensity) and EUI as basic scope of work.  Maybe the more surprising thing is China announced a new building code next year to include carbon emission analysis as a basic scope of work for all buildings.   New buildings in 2022, among other things,... Read more

Office furniture’s materials and components can come from unsustainable sources, and use adhesives that emit formaldehyde or other volatile compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves tables, desks, and other office furnishings certified to BIFMA’s multi-attribute level 3 standard, which requires low... Read more

Hi Folks - sorry for the late notice, but I just heard about this two days ago and needed to get confirmation that I could share the request with htis group.

The opportunity is for business leaders in energy, efficiency, construction and design (i.e. all of us!) -

As you know, the flow of the historic federal infrastructure and... Read more

Looking for an example or case study for a building utilizing a radiant heating/cooling in climate zone 4a. General use type is office with some public assembly spaces, total of 85,000 sf.

As usual, everyone, especially mechanical engineer, is terrified by the thought of "condensation." So far, I read a DGWW case study, "Energy... Read more