Last summer I shared a request here for folks to take a survey we had open that aimed to understand how architects and engineers are (or aren't) using climate projections to inform design. This white paper, written in collaboration with HGA and the University of Minnesota Climate Adaptation Partnership, reports on the results of that research. ... Read more

Following up on one of our conversations on the vision vacuum and sustainability beyond certifications, I would like to help facilitate an offline conversation with anyone working within their firm to use the AIA COTE measures as a guiding framework in their firms/projects. Attached are my slides on my first pass at thinking about this at Page... Read more

I’m a volunteer member of the ASHRAE 209 ("Energy Simulation Aided Design for Buildings Except Low-Rise Residential Buildings”) Committee.  Are you familiar with ASHRAE 209? It was first published in 2018, and it outlines a process for incorporating energy modeling into the design process. 

From the forward: 

 ASHRAE Standard 209... Read more

Hi everyone,

Thanks so much to those who attended and shared at the Greenbuild 2024 Show & Tell! As always, we had a riveting lineup of presentations.

The slides for the presentations are below. We have permission from all of the following presenters to share the slides within Peer Networks-only spaces, but only the slides... Read more

Hi: Please check out the fantastic editorial from Ned Cramer at Architect on "The Future of Architecture Education is the Future of Civilization". The deadline to comment on the latest draft of the NAAB accreditation criteria is November 22 and, as in the past draft, it falls far short of prioritizing climate action and sustainability. VERY... Read more

Tomorrow is my last day at FXCollaborative before I head back to school. It has been such a gift to engage with you all over the past 10 years. Please stay in touch - my contact information is ilanajudah@gmail.com. I am headed out to UBC next week to do a deep dive into resilience and adaptation in urban environments.

FXCollaborative... Read more

Good morning all,

I'm new to the forum and I am really happy to be here. For the last year or so, I have been working to advance high performance design at Flad, grappling with so many of the issues discussed in this forum. Especially in the context of recent times, it feels really wonderful to join a group of people dedicated to helping... Read more

Hi All! This is a question for NYC and surrounding area (but if its the right fit, could extend beyond)! 

Can anyone recommend a designer for healthy and sustainable furniture for an affordable housing development?  The spaces that need funiture are: a community facility, common spaces, and residential units (for formerly homeless). ... Read more

Welcome to the quiz portion of Energy Modeling for Early Design Decisions (recorded webcast)

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how energy codes and standards are pushing commercial projects beyond what they can do without modeling.
2. Describe the key... Read more

Help regarding below...

OSHA, see below link, suggests 6' social distancing for unvaccinated or at-risk workers.

https://www.osha.gov/coronavirus/safework#role-employers-workers

Is your office going to maintain 6' social distancing for your workers?   Is the reason above because there are unvaccinated or at-risk workers?... Read more

Evaporative coolers use far less electricity than conventional refrigerant-cycle air conditioners and they operate without the use of refrigerants, both features that make them attractive for green buildings. However, their suitability is limited to drier climates, and most products use significant quantities of water.

BuildingGreen... Read more

What is the status of the roof insulation market regarding non-halogen containing polyiso boards? I know GAF and Atlas still have them. I thought JM had them as well, but seems to have taken them off the menu. Are there performance issues?

It’s Summer Summit season! One of the “good problem to have” challenges we’ve had at recent SDL Summits has been too many great five-minute presentations. It’s hard to find time for them all. This year, since we’ll be online anyway, we can get a jump on that by starting the five-minute presentations early. Plus, we can share them across all the... Read more

Hi folks,

We've got another timely and engaging webinar lined up! Join Panama Bartholomy and Peter Rumsey for the latest on electrification policy and applications. (As always, if you can't make it at this time that's ok, we'll be recording it.) 

Register here to get the link: https://www.buildinggreen.com/peer-networks/webinars... Read more

We have a project that is looking for plaster/stucco/textured wall products that are sustainable, or “more sustainable.”

I know these products exist, but I haven’t had to spec or work with any, so I’m reaching out.

The project is in MA, so I'm also soliciting recommendations for products and/or companies who are experienced using... Read more

Please help share the latest COTE news, with reports from the AIA Conference, a letter from chair Lori Ferriss, Michelle Amt's review of the 2023 Top Ten winners, and more.

**Be sure to make a note**
The COTE Top Ten Awards cycle has changed. The adjusted timeline is already upon us: The 2024 awards call opens on August 8, and... Read more