Hi all,

Our team has been working hard to wrap up this year's SCL Summit Report, and we're excited to announce that it is finally complete!

https://docs.google.com/presentation/d/1zcSPctZ1BiyPQomiw4wTQLajR816mm3KJV0BL5B14-0/edit?usp=sharing

In addition to the usual summary of key points from the summit, this report captures... Read more

Welcome to the quiz portion of Re-Framing Sustainability: Green Structural Engineering.

Learning Objectives
Upon completing this course, participants will be able to:


1. List at least three design approaches to green structural engineering.
2. Recognize two issues that would encourage owners to invest in... Read more

testing

Hi all, 

The San Francisco Department of the Environment is hoping to gather info from designers and specifiers about construction surplus materials. Their survey is 8 questions total and not limited to those in the SF area. 

Pasting info below if you have a chance to participate! 

Calling Designers and Specifiers:

... Read more

Is anyone aware of research or guidance that has looked at VOC’s from roofing products and ventilation intakes? I’ve done some searching, and focus is mainly on managing the construction process to reduce installer exposure. 

Thanks for any help!

Tate

Hi all, it's time to schedule our next session. Who's in? Ping me at amt@vmdo.com if you want to be considered part of the working group, and fill out your availability on this Doodle poll.

If you just want to monitor what's going on, we'll post updates to the Working Group page. 

The agenda for this call is to figure out what we... Read more

In looking for ways to reduce jobsite waste and lower our carbon emissions, I'm working on a business plan for centralized procurement, in lieu of individual project purchasing their own tools, PPE, & consumables.  I'm curious as to how many other GC's on here use (or have used) a central purchasing process and if you have any pros/cons... Read more

Hello all,

The Bay Area SCL contingent has recently published an anti-idling toolkit so contractors can get empowered to enact their own anti-idling policy on their jobsites. We're all in this together - if you haven't already brought this up with your company management, hopefully this toolkit serves as a good starting point. 

... Read more

At our SAL call today, folks were talking about how there was just too much to read about DEI. This is the best short summary I have read about the problems of incorporating it into the organizations where we work. It's much easier to talk the talk than to walk the walk because it takes time and accountability.

We apologize, but the heating fuel cost calculator is no longer on the BuildingGreen website.

Take a look at Efficiency Maine's heating fuel cost calculator instead.

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Glazing is by far the most complex single component of our enclosures and it must be climate-tuned to boot. Getting the amount, the location, and the performance attributes of glazing is key to... Read more

Exterior doors often have poor insulation and seals that allow air through.

BuildingGreen-Approved Exterior Doors

BuildingGreen has different criteria for commercial and residential exterior doors.

Commercial swing (hinged) doors must be NFRC-rated, certified, and labeled for U-factor. They have a maximum air leakage of 0.... Read more

Hi Folks ,

Two fun and useful events to help us all do more in less time!!

1. DeCon Hackathon 4/12

These are sessions where the community comes together to 'crowdsource' standard construction details that are disassembly-friendly for a public detail library so that everyone can use it and start adapting those details in... Read more

This pre-summit workshop was pre-approved for 5 AIA LUs and 5 GBCI CE hours.

Please complete the survey question to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please check your profile to be sure... Read more