Hello Green Gurus,

Here is the information for December's Peer Networks Webinar, Architects in the Blue Zone: The AIA at COP26. We hope you will join us!

Register HERE

Architects in the Blue Zone: The AIA at COP26
Wednesday, December 15th, 2021
4pm - 5pm ET (1pm - 2pm PT)

Description

The American... Read more

I'm writing an article surveying and comparing various embodied carbon tools, including whole-building LCA tools. I'm looking for interviewees who have used at least TWO of the three major LCA tools currently in use in North America (Tally, Athena IE, and One Click LCA). If you've tried all three, all the better! If you or someone in your firm... Read more

Hello! Does anyone know of any general contractors who produce a CSR? Is anyone aware of any general contractors who have an ESG rating? If so, what company is being utilized (i.e. EcoVadis) to get the ESG rating?  

Welcome to the quiz portion of Finding Products for LEED v4—A Guide

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe ways in which the LCA approach is gaining ground in LEED v4 and how the transition is reinforced by manufacturer transparency and disclosure.
2.... Read more

Rotary Uninterruptible Power Units

Power interruptions and brief changes in voltage can damage electrical equipment, compromise computer data, shut down manufacturing, and endanger hospital patients. In the case of power outages, generators usually take over, but about 98% of all interruptions last less than ten seconds, and there is a... Read more

Hello SDLs!

Here is the 2018 SDL Summer Summit Report, ENJOY!

In a couple of weeks we will share this report with the broader Green Gurus group. 

We are also working on setting up a webinar to present the 2018 SDL Summer Summit Report and discuss the Summit!

All the best,

RoseAnn

Hi everyone,

It was so wonderful to meet some of you last month and experience the whirlwind of a summit! I hope you've enjoyed looking over the Summit Report and the flip chart notes, and they've helped bring some order to the vast amount of material we covered. Here's one more piece for you - slides from the 5-minute presentations.... Read more

Jason F. McLennan

Does anyone know of a source for finding the operational solid waste generated by typical building/use types (weight/sf)? I couldn't find anything on LEED, True, or EPA. I found this table but isn't by sq ft for many of hte uses. Waste Generated by Industry and Building Type (wastecare.com)

Hi, all! We've got amazing editorial plans for our December and January coverage, including Brent's rollout of the Top 10 Green Buiding Products for 2024 and a much-needed update to Wood: What's Good? 

Here's the trouble: we have waaaay too many good ideas about what else to cover. And I super suck at mind reading. So Nadav thought maybe... Read more

Hi GG: Just wanted to make sure you know about a free webinar that Buildings & Cities and Carbon Leadership Forum are putting on:

Zero Carbon: Can Built Environment Education Deliver?

Monday 8 February 2021, 9 – 10 am PST

Details and registration through this site:

https://carbonleadershipforum.org/zero-carbon-... Read more

On LEEDuser we divide checklists into multiple project phases. Specifically:

How many of these phases are relevant for BIT best practices?

Note that we also... Read more

Hello Everyone!

Wondering if anyone has expertise in Algae Photobioreactor facades? Here is a product: https://cellparc.com/

My basic understanding is that they produce heat and biogas (as well as providing shade and some thermal value.)  However, I am not clear on the GHG balance benefit, so to speak.  I cannot determine if the... Read more

Hello to all,

Are you familiar with examples of commercial kitchens using all induction / all electric cooking, without gas or other fossil fuels?

For a dining hall for 1800 students, we are interested in precedents.

Thanks!

Tamar

Hi friends,

We recently tracked our water consumption on site during the structural demolition of some existing reinforced concrete buildings.  The new OSHA silica regulations required us to keep dust to virtually zero, so we had a bunch of mist cannons and water hoses pumping water around the clock.  We consumed ~855,000 gallons in a... Read more

Hello Sustainable Community Design Leaders,

Now that everyone invited to the SCDL calls has access to this forum, I want to shift us over here for announcements and reminders, so here's your reminder that this month’s call is next Monday, March 21st, 11am–12pm ET (8-9am PT). Back to our usual time!

You can view the agenda here.... Read more

Hi all - back in May I asked you for help reviewing our series ahead of publication. The first 5 posts are up, with the 6th a day or so away. Thanks to everyone who has helped out! 

It's a fail-forward effort to help us figure out what we are missing in our climate action on our projects and advocacy. Enjoy, and let me know if and how... Read more