Hi All,

I am looking for a lifecycle analysis consultant to work on a feasibility study in New York. They should have capacity to analyze and compare various architectural, structural and mechanical components for environmental impacts, primarily GHG emissions. Any recommendations are greatly appreciated.

_Ilana

Products & Materials Specialist and LEED AP BD+C Brent Ehrlich excels at deep, unbiased, and nuanced technical research on the health and environmental impacts of green building products and materials. Some areas of focus include:

product and material constituents, including their risks

product certifications

... Read more

Hi All,

I have a commercial restauranter in Colorado who is (reluctantly) considering induction cooking. Does anyone know of any good resources out there that can help make the case for this? That would include testimonials, research, videos, testimonials, or whatever else can help get a commercial kitchen comfortable to moving to... Read more

We are trying to figure out how we are going to meet the LEED Credit for Building Life Cycle Impact Reduction for the first time.

One approach we're trying out: We're taking the results of our Tally model and looking at potential reductions from low-carbon concrete. However, the problem I am encountering is that when I take some of our... Read more

Hello friends, Posting this to help out a friend that you all know!

(please reply directly to Kira at her email below) Tx

Dear Gurus, 

I am curating/hosting a panel at CarbonPositive RESET:

DESIGNED FOR CLIMATE: A New Construction Showcase

North & South America: September 8, 2020 | 4:45-5:25pm (PST)

Mass Timber Construction: An Economic Study of Supply, Best Use, and Implementation in three North American regions

This series unveils a macroeconomic study of building with mass timber in three U.S. regions; the Upper Midwest, Rocky Mountain Colorado, and the Southeast. 

Three companies - SCB Architects, LeMessurier, and Turner... Read more

The LBC v4.0 materials imperatives for Responsible Materials (Core) & Responsible Sourcing require a majority of wood materials (by cost) to be FSC. Sure. But what is - or isn't - considered wood? The Clarification page for the imperative's scope and a key definition poses a perplexing conundrum: 

"All wood included in the Materials... Read more

Auto-quiz used for CEUs for attendees of the 2023 SCL Wintger Summit.

Folks,

In case any of you enjoy the Phoenix weather, I wanted you to be sure to know that our company, Sundt, which is headquartered here is looking for a sustainability director to lead up our efforts. This comes after two years of work and hiring a consultant (Brightworks out of California) to help us prepare and take the next steps. I... Read more

Greetings all, and welcome to all those who already introduced themselves!  My name is Steven Burke and I am a Sustainability Manager at Consigli Construction in Massachusetts.  We are East Coast only, but we have a few offices from DC up to Maine.  I’ve been helping Jenn and Nadav get this group up and running, and I’m relatively new to the... Read more

I was asked to share this with my network...

"For colleagues working with LCA data, during design, construction, or facility management proces, please help us understand how EPDs are useful in your processes by completing the survey below:"

https://www.linkedin.com/posts/ashrant-aryal-2354497a_qualtrics-survey-q...

Hi All,

Polling the group to see if anyone has experience with Simergy - an e+ based modeling tool?

The tool appears to have features and integration with a lot of e+ plugins that make it attractive - but i haven't heard of its widespread use.

Is anyone successfully using Simergy?

Here's a file upload.

Successfully managing the LEED documentation process requires specific knowledge, tools, and skills that are not covered in the LEED Reference Manual. This CEU course is based on the LEED Project Management course that GreenStep developed and teaches through UC–Berkeley Extension. It is designed for professionals who are somewhat familiar... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Welcome to the quiz portion of EPDs Are the Future of the Building Industry, Whether You Like It or Not.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how environmental product declarations (EPDs) are made, what they tell you, and how they're best used.
2. Describe... Read more

Hi Sustainable MEP Leaders!

As we discussed at the Summit, we are going to have monthly calls to check in and advance our various initiatives. Let's go with the 2nd Tuesday of the Month.

Please join if you can--we have a lot to follow up on! (See the report I posted earlier this week for details.)

Thanks, and have a great... Read more