Hi folks,

Our regular SMEPLeaders call is next Tuesday, Sept 12 at 2:00 eastern (if you don't have this on your calendar, let us know and we'll resend the invite).

We've had a GREAT run of meetings that kicked off with someone sharing on a topic they're excited about or challenged by. The conversations that follow that kind of... Read more

Hello - I seem to remember a thread on Sustainable Design Specialist / Advisor - Focused or Integrated Position within a firm. Does anyone remember the subject header or did I just dream this up? My searches are coming up empty...

Thanks!

Mona

Mona Lemoine, Architect AIBC, MAA, MRAIC, LFA, LEED AP BD + C

Senior... Read more

Hi all,

Just wanted to put a couple of useful webinars on your radars if you haven't heard of them yet:

#1: The Contractor’s Role in Quantifying and Reducing Embodied Carbon: Why, What and How

This webinar will provide an overview of what a contractor's role is towards embodied carbon reductions, and how two General... Read more

Hello SCL! We are excitedly planning for a return to in-person SCL Summits. In the past we've scheduled our Summit for the day before Greenbuild, but that day is Halloween and we understand the importance of spending that time with family. We are exploring a January 2023 option for this Summit instead, and are hoping to return to our usual... Read more

I wanted to make sure that everyone saw this.   Next Friday is a launch webinar for the Commitment.

Introducing the Contractor’s Commitment       November 13th, 2020          3pm - 3:30pm ET (12am - 12:30pm PT)

This webinar will mark the launch of the Contractor’s Commitment as a pilot program for 2021. We’ll give a brief overview... Read more

Following up on one of our conversations on the vision vacuum and sustainability beyond certifications, I would like to help facilitate an offline conversation with anyone working within their firm to use the AIA COTE measures as a guiding framework in their firms/projects. Attached are my slides on my first pass at thinking about this at Page... Read more

In the Passive House session at the Winter Summit, I spoke about a Massachusetts DOER report that found that meeting the new energy code in MA (passive house or better in most cases) is cheaper for some building types than traditional construction. Some of you asked to see the report. It was a power point show. On page 34 of this slide deck... Read more

We are working on a tenant improvement and want to determine the embodied carbon on bookshelves, product display cases, and desks. Initially finding that Tally is not reading furniture, casework, or fixture families. Are there any tips and tricks you have found to be successful for modeling or defining FFE items in Revit and quantifying... Read more

What general forums do you want (in addition to the Best Practice forums)? On LEEDuser we have "Forum quick links" in the left sidebar that cover general topics:

https://leeduser.buildinggreen.com/forums

For example, you could have:

and any other category that isn't restricted to a... Read more

Indoor pollutants can cause health problems and disrupt HVAC system functioning.

BuildingGreen-Approved Filtration

BuildingGreen approves a variety of equipment, filters, and pre-filters that remove particulates and contaminants, minimize pressure drop, or reduce pollution from operations. Products include:

Plans are coming together for this Summit! Here's what we know (at least tentatively) so far:

Location:
Chicago, SmithGroup office

Timing: 
July 9-10, 2019

1:00 p.m. start time on 9th, 3:00 p.m. end on 10th

Hi All,

Elkus Manfredi Architects in Boston is looking to fill a few positions -if you know of anyone looking in the Boston area, plesae let me know or send them my way. Kfritsch@elkus-manfredi.com

Specifically looking for an entry-level person with specialized expertise in parametric modeling, conceptual energy modeling and... Read more

Hi,

I believe a while back there was communication about a hard hat recycling program. Does anyone have any information about a hard hat recycling program? The contractors in the midwest have finally switched to the new style of hard hats with the chin strap and are requiring all subcontactors to comply by July 1, 2024. I'd like to... Read more

Hello all, 

Wondering if anyone has experience with lead limits in electrical cable and wiring? 

LEED for Healthcare allows a limit of 300 ppm of lead in electrical wire and cabling - my search for compliant products has been all dead ends. (MRc PBT Source Reduction - lead, cadmium, and copper)

Acceptable regulations for... Read more

Welcome to the quiz portion of Affordable Housing and Sustainable Design: The Goals are Aligned

IMPORTANT: This quiz covers all related articles within this topic. Scroll to the bottom of the article page to find links to all the articles covered by this quiz.

Learning Objectives
Upon completing this course, participants... Read more

Facilitating Engagement and Collaboration in Virtual Meetings (or, Avoiding a Goat Rodeo with Many Awkward Silences*)

If you weren't already sitting in virtual meetings every day... We all are now. So how do we facilitate an online meeting in which everyone is focused, engaged, heard, collaborating and problem-solving in an efficient,... Read more