Good Afternoon -

I'm wondering if anyone has a sample project wellness plan or survey that they'd be willing to share?  The 2.0 says additional resources are coming soon but I have a few project engineers that want to help get these going and are looking for a starting point.

You can email me direct if you don't want to post here... Read more

Hi All, this is primarily directed at our Sustainable MEP folks, but please anyone with insight feel free to weigh in.

I am increasingly seeing designs and specifications asking for Passive House levels of airtightness as verified by blower door testing, but with traditional ventilation system designs. 

To me, Passive House US has... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Whole-building life-cycle assessment (WBLCA) can help project teams reduce embodied carbon as well as many other environmental impacts of building materials. And it’s incentivized in LEED and... Read more

Green gurus!

We're getting some interest from clients abroad on two specific materials which we don't have experience with here in the U.S.:

1) Cross Laminated Timber (CLT)

and/or 

2) CarbonCure concrete

Anyone willing to share lessons learned on these material either here in the forum or offline? Or point me... Read more

HGA is collaborating with the University of Minnesota Climate Adaptation Partnership (MCAP) to research how the AE industry is currently using climate projection data, and what they need in order to grow their use of data. MCAP is currently producing a set of dynamical downscaled climate projections for the state of Minnesota and unlike other... Read more

Has anyone developed a disclaimer to be issued with LCA models and reports? I have been asked to look into developing a disclaimer to be used with LCAs, and unfortuantely I have not been able to find past precedence on this. 

Thank you,

Stephanie Fargas

I am diving back into Sefaira for the first time in a while, and the program still seems to be missing the ability to account for automatic daylight dimming in energy savings. Previously I had used an LPD reduction equivalent to emulate the savings automatic dimming would provide. Has anyone done a similar work-around? 

Hello friends,

We are embarking on calculations to quantify avoided embodied carbon from converting an old school building into a multifamily project and I wanted to vet our methodology with you.

Our idea is to first establish a benchmark for a new replacement multifamily building based on published studies. We have found a few... Read more

Exterior doors often have poor insulation and seals that allow air through.

BuildingGreen-Approved Exterior Doors

BuildingGreen has different criteria for commercial and residential exterior doors.

Commercial swing (hinged) doors must be NFRC-rated, certified, and labeled for U-factor. They have a maximum air leakage of 0.... Read more

Hey All,

I wish I could brag about the tremendous success Integrus has had in conducting a robust LCA on every project.  Our goal is to use Tally to conduct a WBLCA on every project, but we are struggling with issues with staff time, project schedules, scarcity of expertise, and not having a streamlined process to produce reliable... Read more

There are a few spots left for the 2018 Summer Architecture + Design Sustainable Design Leaders Summit that is being held August 1-3 at the Garrison Institute in Garrison, NY (Easy train ride from NYC). If you have not already received an invitation, and you play a sustainability leader role - either formal or informal - in a mid-sized (>40... Read more

Welcome to the quiz portion of LEDs: The Future is Here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Restate the energy efficiency and long service life of LEDs.
2. Describe basic LED components and how, when assembled, they perform differently than traditional light... Read more

Hello all, there has been a fair amount of discussion about the emerging Cove Tool for early stage energy modelling and parametric optimization at our firm. I am very curious if any of you are using this software, and if so, what are your thoughts about it? 

https://www.covetool.com/

Thanks,

Esteban Matheus

Bobbie Socks

Blast from the past when 179D first hit the scenes.

Are any of you still using this and if so, has it been easy, successful, worthwhile etc

and Happy New Year !