This summit was pre-approved for 3.5 AIA LUs and 3.5 GBCI CE hours.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please check your profile to be sure your... Read more

Greetings friends.

Many of you have heard about the CARE Tool, (formerly the 2Build or not 2Build Carbon Calculator.) We are now in the final stages of bringing it online as a free, open access tool hosted by Architecture 2030. We are finalizing and aligning data and working with a web developer (the same one that brought us... Read more

I'm writing an article surveying and comparing various embodied carbon tools, including whole-building LCA tools. I'm looking for interviewees who have used at least TWO of the three major LCA tools currently in use in North America (Tally, Athena IE, and One Click LCA). If you've tried all three, all the better! If you or someone in your firm... Read more

Good morning SDL,

I have a request for all of the supply chain labor folks out there… I would welcome hearing about your experience/stories/pointers you have based on your project work applying the DfF toolkit or other comparable supply chain labor efforts.

We have a socially minded client that is interested in Design for Freedom... Read more

As BuildingGreen’s Content & Data Wrangler, Fran is a spreadsheet and content-management wiz who:

Fran also compiles data submissions... Read more

Conventional roofs contribute to heat loss, heat islands, and excessive stormwater runoff.

BuildingGreen-Approved Green Roofs

BuildingGreen approves systems with appropriate planting media that can be created from regional materials and may be blended for specific characteristics, such as:

Nothing exciting like embodied carbon or EPDs... but I'm interested in some real talk on the actual performance of low-flow fixtures.  

We continue to encounter pushback on water-saving fixtures for concerns of ongoing performance. I'd love to have a dialog in this group because I find it hard to believe these challenges can't be... Read more

On LEEDuser we divide checklists into multiple project phases. Specifically:

How many of these phases are relevant for BIT best practices?

Note that we also... Read more

Figured I'd throw out this topic to the hive mind!

We are working on a project in the Midwest that involves taking down and replacing an 100-ish-year-old brick building. We are hoping to find a way to salvage and reuse some of this brick in new construction. I'd love to do an LCA comparison showing the benefits of salvaging the brick vs... Read more

Looking for an example or case study for a building utilizing a radiant heating/cooling in climate zone 4a. General use type is office with some public assembly spaces, total of 85,000 sf.

As usual, everyone, especially mechanical engineer, is terrified by the thought of "condensation." So far, I read a DGWW case study, "Energy... Read more

ICYMI, this washington post piece reminded me of our summit conversation last Friday about architecture's/SDL's role in reimagining the world post-covid through innovating our practice. 

The article contains some compelling quotes from several visionary architects (fascinated that it's mostly big-A architects, largely bypassing input... Read more

Welcome to the quiz portion of Solar Thermal Hot Water, Heating, and Cooling.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain active and passive; direct and indirect; and low-, medium-, and high-temperature solar thermal systems.
2. Distinguish between the three most... Read more

Hi everyone! LMN is embarking on a 17-part series to explore a more comprehensive carbon metric via summaries of various topics with lots of link. This dovetails with many other efforts in the industry and will reference all the best stuff that we are aware of...such as MEP 2040, SE 2050, CLF stuff, Epic tool, CARE tool, Arch 2030 publications... Read more

Does anyone have a good recommendation for getting started with energy modeling with future weather files? We use a combination of Sefaira and Climate Studio, but open to suggestions. Even just links on how to approach this for making good recommendations to clients. Thanks in advance.

Hi everyone,

We're still working to find the optimal time for the SDLS monthly call. We're now looking at the 4th Tuesday of the month. Please fill out this doodle poll to let us know which of these times work for you.

Thank you!

Jen

Hello Sustainability Leaders!

The monthly all Peer Networks Meetup has been a wonderful way for casual “face-to-face” connections since the beginning of the pandemic. However, after more than a year with the same structure, we think it’s time for a change. Throughout our virtual summits and events one of the most popular aspects has been... Read more