Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

We just heard from one of our more progressive clients that they are pulling Mohawk from their shelves and are no longer allowing it on their projects. Apparently there are some chemical ingredients they objected to, but more importantly the manufacturer "lied" to the client about the content. Does anyone have an idea what this might be about?... Read more

For those of you who are close to CLT and mass timber, has the jump in US wood price also impacted the pricing of CLT on your projects, or viability of CLT compared to the cost of steel or concrete frame buildings?  

If anyone has price data comparing CLT today to pre-Covid pricing or any metric that would describe the percentage change... Read more

Hi Everyone! 

I am building our internal/firm resources around sustainable design, and creating our post-occupancy evaluations is one of those resources. Does anyone have references or resources they'd recommend me to look into for post-occupancy evaluations? So far I am considering a few evalutation types: building user input, building... Read more

I'm advising a nonprofit organization (the Retreat Farm) on whose board I sit that is renovating a large, 8,000 sf, 19th Century barn into a large community meeting space and wedding venue. We are looking for a source of either folding or stacking chairs that are durable, low-maintenance, and environmentally responsible. We may be seeking... Read more

Welcome to the quiz portion of Re-forming the Building Industry: Equity, Diversity, and Inclusion!

Learning Objectives
Upon completing this course, participants will be able to:


1. Define equity, diversity, and inclusion, and explain their relevance to the building industry as well as how they contribute to occupant and... Read more

Wall and corner guards increase durability, but these products are typically made of PVC.

BuildingGreen-Approved Guards

BuildingGreen approves products that avoid the use of PVC and are made with recycled content, FSC-certified wood, other biobased materials, or less-problematic plastics. 

Health and Environmental... Read more

I thought some folks here might be interested in a webinar we have coming up this Thursday 12/6 on the topic of best practices for occupant comfort surveys. Although this webinar is part of our Roast launch series, it will be tool agnostic, with information that will be applicable to any occupant survey regardless of tools used. 

To... Read more

I'm looking for products that have cradle to cradle documentation, as well as EPD's & HPD's and are red list free.  What are your go to websites when you're researching products?

Hello friends. On a current school project, an abuse resistant wall covering has been proposed as an alternative to our typical MDF wainscot. The proposed product has been used successfully in healthcare, and switching to it will save the project almost $1million, which is no small amount when the project is over budget and 7-figure cost... Read more

Now available on demand

As more and more architects, designers, contractors and owners demand transparency surrounding human health impacts in the built environment, manufacturers need short cuts and tools to meet the call of this demand.

This webinar is intended to educate manufacturers about the market demands for creating... Read more

Will you be at Greenbuild in Chicago? Stop by BuildingGreen/LEEDuser booth #1522 for informal conversations with guest experts and BuildingGreen editors. You are encouraged to RSVP and add the meet-ups to your calendar, but not registration is not required.

WEDNESDAY NOV. 14

10:45 AM - 11:15 AM
Dan Winter, Neil... Read more

Welcome to the quiz portion of Seal, Tape, Gasket: A Sticky Search for Better Materials.

Learning Objectives
Upon completing this course, participants will be able to:


1. Choose the best means of achieving barrier continuity for any given application.
2. Assess a joint sealant's service life and product... Read more

Jill is a mission-driven leader who loves working with people, solving problems, and strengthening the infrastructure of values-driven organizations that are committed to having a positive impact in the world. 

She brings decades of experience analyzing and understanding the value of operational efficiency across a variety of... Read more

Both Z Smith and Lois Vitt Sale have been notified that they have been elected to the College of Fellows of the AIA, class of 2018.

Please join me in congratulating Z and Lois, and post here if you know of others who can now carry the FAIA label.

Well done guys!

Hello, 

I am struggling with understanding if I should be using Annual Marginal Emission Factors (MEF) or Annual Average Emission Factors (AEF) for evaluating different building design decisions.

Everything I know is from this document. So as I understand it ... an individual building or retrofit is going to change the marginal... Read more

Hi folks,

We're kicking off a new way for us to collaborate as a network: monthly web-based conference calls. The first one will be on Friday, Nov 15 at 1:00 eastern time. The topic will be "Sustainability and the Small Firm: Practices in Transition" -- which is the name of the proposal James has submitted (and gotten first-round... Read more