Our firm held off from signing the AIA Materials Pledge because it was perceived as a feel-good commitment to promise to have good intentions, with no tracking.  I was pleased to learn yesterday that reporting for signatories of the AIA Materials Pledge would "open" today (July 18) and close August 31, and would include mandatory reporting on... Read more

We have a project that is looking for plaster/stucco/textured wall products that are sustainable, or “more sustainable.”

I know these products exist, but I haven’t had to spec or work with any, so I’m reaching out.

The project is in MA, so I'm also soliciting recommendations for products and/or companies who are experienced using... Read more

I am looking for a healthy and safe mold preventative product to use on wood construction to prevent mold growth as this full wood building (truss, framing, exterior sheathing) will be exposed to moisture via the elements until the roof gets put on in earlywinter.

Please share your feedback, thus far we have found what looks like a lot... Read more

For questions and/or to be added to the Summer Summit waiting list, please email Jerelyn Wilson directly.

2019 Summer SDL Summit
Islandwood, Bainbridge Island, WA
July 31st- August 2nd, 2019

Welcome to the quiz portion of Choosing Insulation: Health and Environmental Considerations – Unit 1.

Learning Objectives
Upon completing this course, participants will be able to:


1. Discuss how insulation works.
2. Summarize how insulation performance is measured and reported.
3. Recount the wide... Read more

Looking for 2-more flushometer style dual-flush flush valves to put in a public project spec alongside sloan uppercut and cannot seem to  find any.  Does anyone have any that they have used?

Thanks in advance!

The AIA has just (finally!) amended the Code of Ethics and Professional Conduct to include new "Obligations to the Public" and  "Obligations to the Environment", that requires architects to advise their clients of their obligations to the environment, obligates architects to promote sustainable design and development, and to implement energy... Read more

Hello everyone, Happy New Year! 

I wanted to send a quick note that we have an awesome group registered for the Sustainable Design Leaders Winter Summit 2020 and we still have a few open seats! This is taking place Jan. 29th - 31st, 2020 at The Lodge, Gulf Shores, AL with an exciting Pre-Summit Workshop happening that Wednesday. If you... Read more

This is deep nerdy stuff, so don't say you haven't been warned.  ASHRAE has opened the first public review to its net zero standard (228).  Here's the blurb:

Standard Method for Evaluating Zero Net Energy and Zero Net Carbon Building Performance ASHRAE Standard 228-202x sets requirements for evaluating whether a building or group of... Read more

Furnaces heat air that is then distributed through ducting and warm-air registers.

Approved by BuildingGreen

Products approved by BuildingGreen include the highest-efficiency, sealed-combustion furnaces and high-efficiency wood or multi-fuel furnaces. A multi-fuel furnace uses several sources of energy such as wood, wood-pellets,... Read more

We are working on a Core & Shell project with a developer that we work with frequently. I'm looking for advice on best approaches to achieving the Whole Building Life Cycle Assessment credit- we haven't used TALLY and done this type of analysis before. What are some approaches to achieving this credit that others have found successful? I... Read more

Hello Green Gurus,

Here is the information for January's Peer Networks Webinar, The AEC Industry is in the Driver's Seat: Strategies to reduce waste & carbon emissions. We hope you will join us!

Register HERE

The AEC Industry is in the Driver's Seat: Strategies to reduce waste & carbon emissions
Thursday,... Read more

Hey everyone, 

With the coming In-Use Off-Road Diesel-Fueled Fleets Regulation | California Air Resources Board we have been doing some research on availability of R-99 fuel prior to the January 1 start date. One thing we aren't finding in the research is an estimate of cost impacts. Has anyone started rolling out R-99 on their sites yet... Read more

Hello All,

I'm supporting a project that is pursuing Green Globes and trying to get familiar with its content.  I'm hoping someone might have experience with the program and be able to provide direction toward products that have an OESR.  From what I've read, this is a material ingredient disclosure type report, based on ASTM std. E3182-... Read more

Welcome to the quiz portion of An Advocate’s Guide to Resilience Regulations!

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how U.S. municipalities are using codes to improve the resilience of the built environment in the face of worsening climate change.

2. Delineate five... Read more

Check out Fast Company's new list of innovative architecture firms with Perkins + Will and NBBJ at the top with great sustainability tag lines. 

That's a great demonstration of the mainstream importance of sustainability!

Congrats to all.

Here's the link: https://www.fastcompany.com/most-innovative-companies/2018/sectors/... Read more