Hello, all! I'm working on an in-depth article about adaptive thermal comfort. I'm looking for interviewees who have real-world experience of working with ATC on a project, including occupant feedback. If you have that kind of experience, I'd love to hear from you!

This is happening on a very tight timeline, so please get in touch with... Read more

Hi Everyone- as a follow up to the 5 minute presentation I did during the recent Virtual Summit-Palooza, I am pleased to announce that the Sustainability Action Plan Guidance Document created by the AIA 2030 Working Group is finished and released.  Please share!

http://content.aia.org/sites/default/files/2021-03/... Read more

Hello Sustainable Advising members,

Nadav and I have created a spreadsheet based on the matrix you all created at the Summit Palooza. The idea of filling this in with your services and activities is to get to know one another better, be able to support each other and build camaraderie. 

Please take the time to enter the necessary... Read more

***Cross-posting this from SCL Group***

Last year I was approached by Green Advantage, remember them from like 2005? There has been a LEED innovation credit for as long as I can remember.

Has anyone seen employed Green Advantage recently? Is anyone asking for it?

Do you see value in GCs/CMs/trades having this training... Read more

Hello Folks,
What is your experience with successes and failures in the design process? As a starting point I have listed my Top 5 for success, and my Top 5 for failure. We'd love to see your reactions and look forward to the discussion when we all meet next week at our monthly check-in.

Top 5 reasons for when integrative design... Read more

Hello Green Gurus,

I wanted to take a moment and introduce myself as I am new to the group. My name is Tim Pranaitis and I am the co-chair of the newly-reformed sustainability committee at Steffian Bradley Architects in Boston, MA. As a newer member of my firm, I have been tasked to re-start and grow our sustainability committee which... Read more

Hello all, excuse the blast and the short timeline -- while not explicity sustainability-related, this is a great way to connect with the future of the profession, and can be a great opportunity for SDL firms on the west coast (a number of SDL firms already participate), specifically in Tacoma, Olympia, San Francisco, Sacramento, or San Diego.... Read more

Fluid-applied roofing materials can be added to an existing roof to extend its life and provide reflective characteristics.

BuildingGreen-Approved Roofing

Products listed by BuildingGreen have VOC levels below 50 g/l and reflective surfaces to reduce heat gain.

Energy Star requires initial reflectance of 0.65 for low slopes... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Hi all, 

I just wanted to post a quick message to introduce myself to the group. My name is Jeff Geisinger, and I'm an architect with Utile in Boston. We're a 50-ish person firm with a pretty broad project base, including affordable multifamily housing, institutional buildings, commercial interiors, and urban planning/public realm work... Read more

Ada Fran Maman

The construction sector’s take-make-waste approach to materials needs an overhaul. Materials and construction account for an estimated 11% of global greenhouse gas emissions annually. At the other end of the life cycle, demolition in the United States annually generates 90% of some 600 million tons of construction-sector debris. Getting trashed... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

I'm sure most (if not everyone) is aware that LEEDv5 is under public review until May 20, 2024. I know I need to make time to flip through it, review, and comment, but I'm having a heckuva time protecting the time in my calendar to do that. Anyone interested in joining me for a 60 - 90 minute meeting to do this together as an accountability... Read more

Dear SDL: Thanks to all who have already given their support to the AIA Resolution on Urgent and Sustained Climate Action. We're into the final push of getting out the vote to pass the resolution next Wednesday, June 5th afternoon in Las Vegas. This requires 2/3s of the voting delegates to pass. So we're asking anyone who 1) is attending as a... Read more

Hi Everyone, 

Has anyone had success in finding organizations or programs that will recycle the hard hats? We are looking into options for recycling our expired hard hats that can no longer be used. Ideally, we would want to use a company with facilities across the country but we are open to any suggestions or ideas you all may have.... Read more