Hi all, we are embarking on an effort to standardize our LCA process in order to maintain a firmwide database of embodied carbon intensity from which we can create internal baselines and targets. I was wondering how other offices are setting boundaries for their LCA efforts. Below is our starting point. Most LCA will be conducted using Tally.... Read more

Hi all!

I'm working on my first energy positive / passive house multifamily building and trying to figure out the trash/recycling chute. I am curious what solutions you have employed to make the trash chute air tight? We have excluded the whole chute from the envelope. Do you use airtight doors (and which ones?) at each floor trash/... Read more

Related to some recent questions on site-specific sun/wind analysis and early energy modeling tools, are there any tools that account for nearby topography (like bluffs) or large buildings/vegetation in energy calculations? Or favorite methods to estimate its impact particularly during early massing studies?

Thanks,

Rachel

Hi folks,

We will be having a call for the Sustainable MEP Leaders group on Monday, April 8 at 3pm Eastern time. Hope you can join us! We'll be talking about our first in-person Summit, as well as diving into discussion about some top-of-mind topics related to being a sustainability point person within an MEP commercial practice. Here’s... Read more

If you haven't seen it yet, today's U.N. report "Making Peace With Nature" tackles climate change, biodiversity loss, and pollution jointly within the framework of the Sustainable Development Goals. 

The analysis is anchored in current economic, social and ecological reality and framed by economics and the 2030 Agenda for Sustainable... Read more

Southface will need a procedure for adding and assigning SMEs to the BITuser site. Normally you could just create the user in BITuser and assign the role right there, but we have the added complication of Salesforce SSO, which means the sequence will have a few extra steps.

Here's the basic outline:

Hello Green Gurus,

We are excited to announce that BuildingGreen is planning a series of in-depth virtual facilitation workshops for this fall. We are collaborating with Julie Huffaker from Deeper Funner Change (who you may remember from the 2020 Winter SDL Summit, or her introductions to virtual facilitation back in April). She will... Read more

Does adding solar panels reduce a building's EUI?

Existing operational use of a building is 80 kBtu/sf/year. When we add solar, it will change the source of energy but does not change the usage.

My understanding is that the EUI does not change, but it would be good to hear from others.

It's energy consumption at the point... Read more

The Center for the Built Environment (CBE) at the University of California, Berkeley is conducting a survey to understand current practices and outlooks among design practitioners: architects, engineers, energy modelers, and related professionals. Our goal with this work is to improve climate change adaptation guidelines that support building... Read more

Happy Friday, SDL!

We're running a Tally WBLCA for an environmental education center, which has a very small floor area but a fairly robust concrete/steel structure. Still, I was surprised to find an intensity of over 1,000 kgCO2/m2 for the building.

This is way higher than the general benchmarks I've found in the CLF's database,... Read more

I'm looking to compare using an electric tower crane vs a diesel generated tower crane.  I've got the average gallons/hour for the size of crane I'm looking at, but when I reached out to the crane manufacturers, they can only tell me what size electric supply I need to provide, not the kWh usage for the cranes.  I know that it varies depending... Read more

Welcome to the quiz portion of Full-Blown Energy Modeling.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the role of the energy modeler and how each energy model opens an informed discussion between the entire project team about the interactions between architectural and... Read more

What is the lag time for historical embodied carbon data catching up with real-time information as manufacturers source renewable energy? Is our professional time best spent calculating with out-of-date information or more simply calling for manufacturers' elimination of fossil fuel combustion in their production and transportation of materials... Read more

A site license allows your entire organization to access and share the guide, and to keep a copy in your library.  

We’re excited to be releasing the 2020 edition of Spec This, Not That. 

... Read more

My apologies if I posted this question twice ont he forum - I am a newbie on this forum.

Anyone knows how to import an structural emobdied carbon project file into architectural project file of the same proejct to generate a combined Sankey graph?  My Building Transparency/CLF contacts haven't got back to me for a week now...

... Read more

Hello all,

We are having a mini office debate on fiberglass vs aluminum windows for use in schools (k-12) in Massachusetts. In the past we have always used aluminum windows on our schools, for durability. However, their performance is not as great as other products that are up and coming on the market. There is some hesitation to switch... Read more