Hey Team,

I'm in a Living Future session where a number of manufacturers are talking about the low uptake they're seeing in their take back programs. Contractor friends... What barriers (if any) are you running into in using take back programs? How might we as architects help increase utilization of these programs?

Aley

Team,

See this paper regarding outside air vs. filtration.

https://www.sciencedirect.com/science/article/pii/S0360132313002515

MERV-13 is a good way to get most benefits without a huge cost.

Best,
Luke Leung

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Peter Yost (at https://building-wright.com/ )  is available to provide building science expertise, trainings, public speaking, building investigations, and more. Learn more

Hi folks,

We have a really great webinar set up for Thursday, Oct 25 at 2pm eastern. This one is based on the 5-minute presentation from Heather DeGrella at the Summer Summit--our jaws were on the floor when she presented it there, and we were hungry for more.

Sign up here: https://zoom.us/webinar/register/... Read more

We are working on a large healthcare project in Minnesota.  We're setting sustainability goals a bit late - no certification, but targets with accountability.  I'm working to determine recycled steel content (for structural steel and rebar), and I've gotten a bit of push-back on recycled content based on being in the region of the Iron Range... Read more

Hi Folks, anyone in Boston (or willing to move) this could be a super cool opportunity for you! 

https://careers-bpda.icims.com/jobs/1557/senior-resilience-design-reviewer/job?mobile=false&width=805&height=500&bga=true&needsRedirect=false&jan1offset=-300&jun1offset=-240

Welcome to the quiz portion of The BuildingGreen Guide to Insulation!

Learning Objectives
Upon completing this course, participants will be able to:


1. Discuss how insulation works to increase the energy efficiency and environmental sustainability of buildings; 
2. Explain why certain materials make more sense than... Read more

Join Brent & Alex to learn what's new and what's been updated in our BuildingGreen Guide to Thermal Insulation, Fourth Edition, including what you should know about:

So much has changed so quickly!

Our 30-minute roundtable... Read more

Dear all,

Greetings. I'm presenting virtually to an audience of architecture and engineering faculty in India on the topic 'Introduction to Climate Change and Adaptive Architecture.' What is expected of the presentation is a broad overview of how climate change affects the built environment, challenges faced and some coping mechanisms. I... Read more

Greetings,

I'm looking for recommendations from this esteemed group for 3rd-party vendors/verifiers of GHG emissions to support our CSR initiatives. We currently have a provider, but our company has grown to the point to where we need to transition from "analaog" reporting (location by location) to a higher level of service offering (... Read more

WELL & Fitwel and beyond.

Guiding Questions:

Welcome to the quiz portion of Certified Wood Update: Comparing SFI to FSC on Key Forestry and Health Issues.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the purpose of forest management standards and what they measure.
2. Differentiate between FSC and SFI... Read more

Hello small firm Sustainable Design Leaders!

We are cancelling our call next week that had been scheduled for 2/13 @ 1pm. That same day, Thursday, BuildingGreen is hosting an all Peer Networks WEBINAR. Please consider participating with the sustainability leaders from all peer networks: Design Leaders, Construction Leaders, MEP Leaders... Read more

Hello, All!  We haven't run WBLCA on a project that may include electrochromic glazing before, and it's embodied carbon footprint is really high in comparison to a more traditional double or triple pane IGU (we thought it would be higher, but this is 3-4x higher).  The EPD we have from Sage Glass for their triple pane electrochromic lists a GWP... Read more

They say that Louisianans are often late to the party but enjoy catching up.  The state, which had been stuck on ASHRAE 90.1-2007 (commercial) and IECC 2009 (residential) and has just adopted legislation jumping to IECC 2021 / IRC 2021, and commits to automatic upgrades with each 3-year code cycle.  This means we join CA, OR, WA, MA, and VT--... Read more

Hello Hive Mind, 

We are exploring the sustainability attributes (or lack there of) of Pre-Engineered Metal Building Systems (PEMBS). These ubiquitous design-build structures often fly under the radar of green building design; they make up billions of square feet of construction globally and are steadily increasing due to speed of... Read more