We are working on a tenant improvement and want to determine the embodied carbon on bookshelves, product display cases, and desks. Initially finding that Tally is not reading furniture, casework, or fixture families. Are there any tips and tricks you have found to be successful for modeling or defining FFE items in Revit and quantifying... Read more

Welcome to the quiz portion of Getting Flame Retardants Out of Foam Insulation.

Learning Objectives
Upon completing this course, participants will be able to:


1. Summarize why and how flame retardants are used in foam insulation.
2. Elucidate the case for taking the chemicals out of foam insulation.
3.... Read more

Hi Folks - sorry for the late notice, but I just heard about this two days ago and needed to get confirmation that I could share the request with htis group.

The opportunity is for business leaders in energy, efficiency, construction and design (i.e. all of us!) -

As you know, the flow of the historic federal infrastructure and... Read more

Whether you’re attending Greenbuild 2024 or live near the Philadelphia area, join us for BuildingGreen’s annual Greenbuild Show & Tell! The event will take place from 6:30-9:00 pm on Tuesday, November 12th at Jacobs, with the first hour for socializing and the 5-minute presentations starting at 7:30pm. Light refreshments and beverages will... Read more

Hi Everyone!

Does anyone have a good resource for whole-building embodied carbon benchmarks broken down by building use and building category (structure, foundation, envelope, interior)?

I know of CLF’s 2017 Benchmark Study (great resource!) and the One-Click LCA study on European Buildings but are there any others?  I know many... Read more

For those who haven't heard yet, we've reached a critical milestone with the Contractor Commitment. 51% of the SCL network voted to approve the language of the current draft. That's the mark we needed to hit, so we can move forward with planning the launch! Thank you to all those who have worked tirelessly over the last two years developing... Read more

Received answers from below questions from NIST Andy Persily

1. Is there a preferred bookends range of CO2 for both “optimal” energy and human performances?

Andy: No

2.Is the ASHRAE ventilation of 1000-1200 ppm average, probably not based on performance, suggesting current ventilation rate is sub-optimal with cognitive... Read more

Ventilation fans, kitchen range hoods, and laboratory fume hoods can use significant amounts of energy from both the fan motor and from venting heated/cooled air out of the building—air that then has to be replaced and conditioned by energy-intensive HVAC systems.

BuildingGreen-Approved Ventilation Fans

BuildingGreen ventilation... Read more

As I prepare to search for summer interns, I'm wondering what colleges and universities have programs for sustainability in the built environment. Are there any that you all know of? I am trying to find alternatives to the traditional architecture programs that we track. Thanks

Hi all, 

I'm posting this on behalf of Wyck Knox of our office. He can be reached at knox@vmdo.com: 

"I’m on the editorial board of the Green Schools Catalyst Quarterly, the only peer reviewed journal dedicated to sustainable K-12 schools. (http://catalyst.greenschoolsnationalnetwork.org/gscatalyst)

One of my tasks in that... Read more

Hello All,

Through a regional School of Architecture, our firm has been connected with a very intriguing startup that has been engineering a new rooftop wind energy technology. They are developing a system to economically capture the increased wind flows at the edges of commercial building rooftops. They have engineered this system,... Read more

Hello!

I am working with a state agency who is interested in exploring performance contracting (primarily energy focus, but not necessarily limited to...) and it's been a while since I had heard of others implementing this (GSA, some universities).

Do any of you out there know of current/recent owners executing performance... Read more

Team,

As you all probably saw, Boston is discussing using both CEI (carbon emission intensity) and EUI as basic scope of work.  Maybe the more surprising thing is China announced a new building code next year to include carbon emission analysis as a basic scope of work for all buildings.   New buildings in 2022, among other things,... Read more

Hi Green Gurus!

Reaching out on behalf of the SDL "Expanding material re-use and including more people in the process" action group from the summer summit. (official name TBD - aka inclusive & circular economy, sustainable materials management, zero waste, deconstruction & reuse, etc.). In a nutshell ...unpacking where building... Read more