Hello Gurus,

I’m writing to share with you an effort a small group of lighting designers from the Boston area started which is now rolling into a large scale effort.  We’ve put together a Lighting Advocacy Letter to accelerate the sustainability of lighting products. Inspired by the AIA Materials Pledge, the letter is intended to... Read more

Water treatment systems often rely on harsh chemicals to treat bacteria, and on high water use from drawdown of water to reduce build-up of concentrates—a process called blowdown.

BuildingGreen-Approved Water Treatment

BuildingGreen approves systems that:

Hi SDL: Please see attached letter to USGBC about the urgent need to address climate change in the next iteration of LEED v4. It's based on the realization that in the last few years it has become clear that climate change has become the dominant global threat to humans and our fellow species. And it has also become clear that the steep... Read more

Jason F. McLennan

Welcome to the quiz portion of Behind the Logos: Understanding Green Product Certifications.

Learning Objectives

Upon completing this course, participants will be able to:


Hello Green Gurus!

Here are the details for an upcoming Peer Networks webinar, Strategies for Streamlining Sustainable Materials.
Save the date! The registration link will be posted shortly.

Strategies for Streamlining Sustainable Materials
September 24th, 2020
2pm - 3pm ET (11am - Noon PT)

This session... Read more

ASHRAE 209 in all its glory has been uploaded. This will impact our architectural process, for better or worse, so we should embrace it and learn from it. The revised AIA Energy Modeling Design Guide (due out next year) has been timed to correspond roughly to 209 coming out and will include references to it. The first few energy modeling '... Read more

Hi,

We have a market-rate housing highrise project that is going through VE right now: we need cheaper/lighter rainscreen claddings than precast concrete or GFRC.

If you've gone through this similar exercise, I would greatly appreciate recommendations for cladding manufacturers/products with EPDs available. We are open to metal... Read more

As we begin to look into Scope 3 emissions reduction strategies, it's important to understand ways to reduce tranportation emissions to project sites. Is anyone aware of best practices or programs for contractor carpooling to jobsites? I know many of my colleagues travel to work together in one vehicle because of parking limitations, however,... Read more

Remember 2013? LEED version 4 had just been released to the public. Hardly anyone was using it, though—not only because they didn’t have to, but also because there just wasn’t a pathway to achieve many of the new credits in the rating systems. Especially the product-related credits in the Materials & Resources category, along with the Low-... Read more

Hello Green Gurus,

Here are all the details about our two Peer Network events in Chicago on Tuesday, June 21st. If you'll be in town, we hope to see you!

From 1-5pm we'll have the Chicago/Midwest Region Mini-Summit, open to members of any of the five Peer Networks (Sustainability Consultants, Community Design Leaders, Contractors... Read more

What sorts of boilerplate and legalese will we need on the BIT User site? For example:

I'm not saying you need any or all of those, but I'm just giving a heads-up in case you need to check with your legal advisor.

I can link to those documents from the site footer.

test

Dear Colleagues,

I proposed CarbonCure for a project and the structural engineer in the meeting was opposed to it. He later sent me detailed reasoning by email. I have not used this technology and would like to hear other more experienced opinions on the technology. The project we are working on is well integrated with climate, 99% sDA,... Read more

Reaching out to the collective knowledge here.  With interest in circular economy and building reuse growing, is anyone leading the charge for the concept of building reuse as a tool for maintaining community identity?  Has anyone seen successful projects with this concept in mind?  I was just in a discussion with a bunch of SDLers, and while... Read more

I'm looking to change consultants. Let me know if you have worked with a 179D consultant that you would recommend.