SAVE THE DATE: ALL Peer Networks Show & Tell
Tuesday, November 19 | 8pm - 10pm
The Kendeda Building, Georgia Tech | Atlanta, GA

Start your time at Greenbuild on a high note!

Join your Peer Networks Colleagues from SDL, SCL, MEP, SDLS, and SAL for a high energy evening full of lightning round previews of the best... Read more

If your HVAC designers are addicted to the crack that is Trace 700, and knowing that Trane is giving up on that product in the coming year, what loads program are you weaning* them onto?

Asking for a friend:  Have any of you had success in using the Revit plug-in for loads?

*When told that they should use IESVE for loads, our HVAC... Read more

Rotary Uninterruptible Power Units

Power interruptions and brief changes in voltage can damage electrical equipment, compromise computer data, shut down manufacturing, and endanger hospital patients. In the case of power outages, generators usually take over, but about 98% of all interruptions last less than ten seconds, and there is a... Read more

Hi! Quinn Evans is looking for a great candidate for a new position that focuses on design performance analysis. We're looking for someone with 5+ years experience in the AE industry and knowledge of performance tools and software that inform design decisions related to energy, carbon, and daylight. The position can be based in any of our... Read more

Small Firm Sustainable Design Leaders –

I find it hard to believe calls for session proposals are already out for next year’s AIA Conference on Architecture.  I feel like I just got back!

At my firm, we try to have all principals and associates to submit a proposal each year.  I had a couple of take-aways from this year’s... Read more

Hello friends, Posting this to help out a friend that you all know!

(please reply directly to Kira at her email below) Tx

Dear Gurus, 

I am curating/hosting a panel at CarbonPositive RESET:

DESIGNED FOR CLIMATE: A New Construction Showcase

North & South America: September 8, 2020 | 4:45-5:25pm (PST)

We're wrapping up a multi year project that went through multiple design changes, leaving us with a ton of material samples.  Does anyone know of a good place we could donate these samples to, to keep them out of the landfill.  I'm in the greater Seattle area.  Thank you for any suggestions.

I was asked to share this with my network...

"For colleagues working with LCA data, during design, construction, or facility management proces, please help us understand how EPDs are useful in your processes by completing the survey below:"

https://www.linkedin.com/posts/ashrant-aryal-2354497a_qualtrics-survey-q...

I'm sure we'll learn more soon, but several people have asked on various platforms about how Betsy del Monte is doing (she lives in Asheville, NC, which was hard hit by Hurricane Helene). 

I had a brief text exchange with her on Saturday 28 September, and I feel sure that she would be OK with my sharing it with you all: 

We’re... Read more

Both Z Smith and Lois Vitt Sale have been notified that they have been elected to the College of Fellows of the AIA, class of 2018.

Please join me in congratulating Z and Lois, and post here if you know of others who can now carry the FAIA label.

Well done guys!

Hi All,

Polling the group to see if anyone has experience with Simergy - an e+ based modeling tool?

The tool appears to have features and integration with a lot of e+ plugins that make it attractive - but i haven't heard of its widespread use.

Is anyone successfully using Simergy?

Welcome to the quiz portion of Exterior Paints: Long-Term Protection and Environmental Tradeoffs.

Learning Objectives
Upon completing this course, participants will be able to:


1. List the primary differences between alkyd and latex paints and stains and between wood, concrete, and metal primers.
2. Explain... Read more

I thought some folks here might be interested in a webinar we have coming up this Thursday 12/6 on the topic of best practices for occupant comfort surveys. Although this webinar is part of our Roast launch series, it will be tool agnostic, with information that will be applicable to any occupant survey regardless of tools used. 

To... Read more

Team,

What are the M vs. E vs. P(FP) ratios of fee distribution you use in your company for a commercial office building?  How about a residential/hotel?

Best,

Luke Leung

Depending on seating type­­, these products can contain PVC, toxic flame retardants, hazardous adhesives and finishes, and other unsustainable materials.

BuildingGreen-Approved Seating

BuildingGreen’s seating meets ONE of the following sets of criteria: