Have any of you heard of anyone ever using phase change material (PCM) "movable partitions" as a resiliency strategy to mitigate indoor overheating during a heat wave in passive buildings? You'd keep them stored in a basement or cool room, and deploy them into habitable spaces during the heat wave to keep the space cooler than the exterior... Read more

Ventilation fans, kitchen range hoods, and laboratory fume hoods can use significant amounts of energy from both the fan motor and from venting heated/cooled air out of the building—air that then has to be replaced and conditioned by energy-intensive HVAC systems.

BuildingGreen-Approved Ventilation Fans

BuildingGreen ventilation... Read more

Welcome to the quiz portion of Getting Flame Retardants Out of Foam Insulation.

Learning Objectives
Upon completing this course, participants will be able to:


1. Summarize why and how flame retardants are used in foam insulation.
2. Elucidate the case for taking the chemicals out of foam insulation.
3.... Read more

Hello,

This is not my area of expertise but our contactor has suggested central heat pump hot water (CHPHW) is $1m more expensive than gas fired domestic hot water for a 150 unit multi-family residential building in Massachusetts. The Building Decarbonization Practice Guide is extremely helpful but, from their comments, it is all coming... Read more

Hello! I just joined the SAL group and am thrilled to be a part of this amazing network! I am an architect and an educator and now run my own sustainable consulting practice in the Boston area. Having previously led the sustainability efforts at several of Boston’s large architecture and design firms, I made the exciting (and scary) leap in... Read more

Dear all,

For a specific existing building application, we are looking for a half inch insulating glazing unit, preferably with low-e coating. Based on my research, 5/8" seems to be doable (1/8" glass + 3/8" air gap + 1/8" glass) but I'm yet to find a viable 1/2" solution. Have you come across any on your projects? Thanks for your... Read more

Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

Hello everyone,

We are far too often asked to include parking in our buildings (because why shouldn't the average family have 2.1 kids, .8 pets, and 3 cars) and it always grates on me that we are putting so many resources (natural and monetary) into something that is almost certainly single use and will need to be demolished in 30 years... Read more

Quiz body not needed for this auto-confirmation

Hi all - I wanted to see if anyone will be in the Chicago area for the upcoming ASHRAE conference (21-23rd) and is interested in an informal meet-up? Or if you aren't going but are already in the Chicago area? Let me know and I'll see if we can organize meet-up!

Hi everyone -
Some of you already have heard some or all of this news, but I thought I'd share today's press release with the whole group.
The headline is: 
SERA is VERY excited to announce that David Johnson, formerly the managing partner of Bill McDonough's San Francisco office, is now heading up SERA's bay area office.... Read more

My firm didn't have representation at the winter summit, but I've just read the report (thank you, RoseAnn!), and was really glad to see there was conversation around mass timber. I'd love to talk with anyone who was involved in that roundtable to get a deeper download about the discussion. We've been doing a lot of mass timber buildings and... Read more

I'm curious if anyone can share their strategy on indoor air quality for the return to office. Is this something that is prioritized at your firm from a wellbeing standpoint and with the current health crisis at hand? Lendlease is looking into options to safeguard our employees/occupants as we move back into the workplace and I'm researching... Read more

The current Stantec/BuildingGreen featured topic is Resilient Design. Read on to learn the essentials, and then dive deep to earn CEUS.

Also see the Material Health featured topic, and also a survey of topics trending in Stantec’s regions.... Read more

Greetings, all:

AIA COTE Advocacy is working with AIA Gov't Affairs to assemble a directory of COTE-friendly AIA Members who are passionate about environmental advocacy and VOTERS in targeted congressional districts. We are organizing in-district meetings after the mid-term elections focused on the members of the Senate Energy &... Read more

Standard HVAC systems require large fans and ductwork to move conditioned air throughout a building, which wastes energy and building space.

BuildingGreen-Approved Chilled Beams

BuildingGreen lists chilled beams that rely on water and smaller ducts to provide HVAC throughout a building.

Performance and Health Considerations... Read more