Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Hello - Other than hiring an acoustic consultant, I am wondering what in-house tools you are using internally at the design stage for modelling acoustic performance? 

Thanks, Mona

Welcome to this practice session for the LEED AP v4 exam, and good luck!

All the exam questions and explanations that follow were authored by Alex Spilger, LEED AP BD+C of GreenStep Education, and are provided in this BuildingGreen "exam simulator" through a special partnership with GreenStep and with our friends at the Poplar Network.... Read more

Hello Green Gurus,

Some of you may have heard that the Sustainable Construction Leaders Group has been developing the Contractor’s Commitment, a set of sustainability guidelines for contractors to implement in their companies. 

The Contractor’s Commitment will be going live on November 13th with this half-hour webinar introducing... Read more

Hello,

Has anyone come across a rating system 'crosswalk' infographic?

Cheers, Mona

Dear all,

On a major renovation where the wall R-value/U-value needs to be brought up to energy code, specifically a mass wall situation, does anyone have insights on how the situation is best dealt with? On the project in question for me, the continuous insulation might have to be added to the inside surface of the mass wall and there... Read more

Lake|Flato is growing our design performance team!  If you know any great applicants for our new design technologist position, please send them our way:

Design Technologist in San Antonio.pdf (lakeflato.com)

Hey Team,

I'm in a Living Future session where a number of manufacturers are talking about the low uptake they're seeing in their take back programs. Contractor friends... What barriers (if any) are you running into in using take back programs? How might we as architects help increase utilization of these programs?

Aley

When BuildingGreen started publication in 1992, simply finding building products designed with environmental benefits in mind was a big challenge. 

In the years since we’ve seen rapid advances in green building materials and products, and manufacturers are beginning to take topics such as embodied carbon and social justice concerns—... Read more

Hi all,

Just like many of you, our firm is dedicated to increasing representation in the professions and through its relationship to the AIA Large Firm Round Table was able to access a National Organization of Minority Architects Fellow this summer. We’re loving our work with Himesh thus far, but it’s unclear whether we have the workload... Read more

Hi. I'm Dan Piselli, the new Director of Sustainability at FXCollaborative. You all may know my predecessor Ilana Judah - she and I worked together closely for many years, and I can only hope to emulate her success.

FYI, a few things about me: I've been a project architect and manager for a number of LEED projects, most recently the... Read more

Welcome to the quiz portion of Changing Building Design Priorities for a Changing Electrical Grid!

Learning Objectives
Upon completing this course, participants will be able to:


Define a “Highly Variable Renewable Energy” generation asset, or VRE, and understand how VREs can most effectively contribute to the... Read more

For those that missed Z's subtle mention of this a few weeks ago, Bora finally decided sustainability is important enough to have someone dedicated full-time to it, and then went out and got one of the best:

https://bora.co/bora-hires-sustainability-director-corey-squire/?tax=all-posts

I've been sharing Corey's thoughts on... Read more

We have a project looking to use Radiant Floors to help with space heating.  I don't have experience with this so I'm looking for any insights.  Pros / Cons? 

This project is a non-profit and is needing to reach LEED Silver minimum.  This is in Washington State.  Thank you for your help.

Discussion groups the user is subscribed to Unsubscribe Change notification settings Find other groups Links to my posts Replies to my posts*

* This gets complicated -- how much should happen on the dashboard and how much should happen in the actual Discussion forum?

Hold off on discussions for Phase 1. What should be here instead for... Read more

What a great first day!

Here are the slides from the show and tell presentations last night at SOM's office; everyone who presented with slides has given approval to share them.