Hi All, this is primarily directed at our Sustainable MEP folks, but please anyone with insight feel free to weigh in.

I am increasingly seeing designs and specifications asking for Passive House levels of airtightness as verified by blower door testing, but with traditional ventilation system designs. 

To me, Passive House US has... Read more

Hello Green Gurus,

Here is the information for February's Peer Networks Webinar, A Tale of Two Working Groups: Decarbonizing Existing Buildings & Defining and Measuring Resilient Outcomes. We hope you will join us!

Register HERE

A Tale of Two Working Groups: Decarbonizing Existing Buildings & Defining and Measuring... Read more

Hello! We are currently working on an LBC Petal project pursuing the Materials Petal. Does anyone know whether H1 lubricants are inherently Red List Free given they are food grade lubricants? We are trying to figure out whether NSF H1 registered lubricants need ingredient reporting or whether the NSF registration works similar to Delcare, RoHS... Read more

Green gurus!

We're getting some interest from clients abroad on two specific materials which we don't have experience with here in the U.S.:

1) Cross Laminated Timber (CLT)

and/or 

2) CarbonCure concrete

Anyone willing to share lessons learned on these material either here in the forum or offline? Or point me... Read more

Hi everyone,

Thanks so much to those who attended and shared at the Greenbuild 2024 Show & Tell! As always, we had a riveting lineup of presentations.

The slides for the presentations are below. We have permission from all of the following presenters to share the slides within Peer Networks-only spaces, but only the slides... Read more

Has anyone developed a disclaimer to be issued with LCA models and reports? I have been asked to look into developing a disclaimer to be used with LCAs, and unfortuantely I have not been able to find past precedence on this. 

Thank you,

Stephanie Fargas

Passing on the request from USGBC Regional director:

" Ben Evans who leads our federal advocacy efforts is submitting a Greenbuild Session focused on the opportunities and challenges of the IRA. He is looking for practitioners who can speak to working to utilize IRA/IIJA programs and incentives. He seeks a real estate company/developer,... Read more

Dear SD Leaders: The comment period closes January 31st on  NCA Volume II Climate Change Impacts, Risks, and Adaptation in the United States.

It's important to have the design communities perspective on these critical issues. I hope you can take a look and submit your comments before the deadline.

Details here: https://www.... Read more

Hi All! This is a question for NYC and surrounding area (but if its the right fit, could extend beyond)! 

Can anyone recommend a designer for healthy and sustainable furniture for an affordable housing development?  The spaces that need funiture are: a community facility, common spaces, and residential units (for formerly homeless). ... Read more

Welcome to the quiz portion of Finding Products for LEED v4—A Guide

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe ways in which the LCA approach is gaining ground in LEED v4 and how the transition is reinforced by manufacturer transparency and disclosure.
2.... Read more

Dear SDL community,

I am supporting one of our health authorities in developing a business case for regenerating healthcare infrastructure as part of the indicative design for a new hospital and cancer centre. While I will be deepening this inquiry through the lens of a PhD over the next few (hopefully 4 or less!) years, I - and we - are... Read more

All,

I've probably spoken to a few of you over the phone, but I wanted to make sure all of you know that we are hosting a 4 part webinar series on our Tally LCA software, kicking off tomorrow 10/10. We just released the new of Tally version and ended up doing far more development work than initially anticipated, in no small part due to... Read more

Hello all, there has been a fair amount of discussion about the emerging Cove Tool for early stage energy modelling and parametric optimization at our firm. I am very curious if any of you are using this software, and if so, what are your thoughts about it? 

https://www.covetool.com/

Thanks,

Esteban Matheus

As you might well remember, one of the Working Groups that came out of the SummitPalooza earlier this year was for MEP Embodied Carbon & Refrigerants.  That Working Group began working with the Carbon Leadership Forum and is now excited to announce the rollout of the MEP 2040 Challenge: “All systems engineers shall advocate for and achieve... Read more

I'm just wondering if anyone is using GBCI's Better Materials site as their go-to source for transparency and healthy materials.  Having all the search engines on one platform is great in theory, and I keep hoping that it will be the one-stop site/resource that I can get all our designers to use.  Unless I'm missing something though, it still... Read more

Split systems are multi-component units that use an outdoor condenser along with separate indoor fan coils to move refrigerant—and provide heating and cooling—in buildings without the need for ducts.

BuildingGreen-Approved Systems

BuildingGreen approves mini-splits that are tested to AHRI standards and have minimum SEER and an... Read more