Hi, and welcome to the Sustainable MEP Leaders Peer Network! 

This online forum is one of the ways we can stay connected and support each other as we collaborate to help MEP design achieve its highest potential as an element of sustainable and regenerative buildings. Please introduce yourself with a little about where you work, what you'... Read more

Looking for 2-more flushometer style dual-flush flush valves to put in a public project spec alongside sloan uppercut and cannot seem to  find any.  Does anyone have any that they have used?

Thanks in advance!

I am looking for a healthy and safe mold preventative product to use on wood construction to prevent mold growth as this full wood building (truss, framing, exterior sheathing) will be exposed to moisture via the elements until the roof gets put on in earlywinter.

Please share your feedback, thus far we have found what looks like a lot... Read more

This is deep nerdy stuff, so don't say you haven't been warned.  ASHRAE has opened the first public review to its net zero standard (228).  Here's the blurb:

Standard Method for Evaluating Zero Net Energy and Zero Net Carbon Building Performance ASHRAE Standard 228-202x sets requirements for evaluating whether a building or group of... Read more

Hello everyone, Happy New Year! 

I wanted to send a quick note that we have an awesome group registered for the Sustainable Design Leaders Winter Summit 2020 and we still have a few open seats! This is taking place Jan. 29th - 31st, 2020 at The Lodge, Gulf Shores, AL with an exciting Pre-Summit Workshop happening that Wednesday. If you... Read more

Hello Sustainability Leaders!

It’s been almost a month since we met in NYC for our Regional Mini-Summit! I’m pretty sure time moves faster when the seasons are changing! I hope the fall is treating you all well.

We have completed our Post-Summit Report, and would like to share with you all. Click here to view the report.

... Read more

Welcome to the quiz portion of Introduction to WELL Certification: On-Demand Webcast.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Identify the Seven Concepts within WELL.

2.  Describe the differences between WELL and other frameworks such as LEED & Fitwel.

3.  List... Read more

Hi All,

After this long winter, who is up for some fierce creativity and friendly competition in your own offices or between your companies?  What do you think of a location agnostic, virtual, Sustainability Scavenger Hunt from Earth Day to Mother's (earth) Day?

We've done the hard work for you. Join in on the fun and save your... Read more

At the recent All Networks Workshop in Seattle, I listened with interest to some conversation about including sustainability goals, KPI's, critical materials lists, and other related topics on a G-sheet in the drawing set.  This is something I had not previously considered, but would like to learn more about. 

If you work for a design... Read more

Can anyone point me to a (dream?) resource listing effective R-values of various wall assemblies?  We are trying to find a cost-effective R-40 wall assembly for a one and two story public middle school targeting net zero energy in Oregon.  Referencing Seonhee's "thermal bridging" thread in late April, I used Therm's native drawing feature, but... Read more

Building materials emit massive amounts of carbon long before the lights go on.

In this course, BuildingGreen takes an analytical look at the greenhouse gases that are emitted in the process of constructing our buildings in the first place—the embodied carbon. The report focuses on how architects and designers, working with other key... Read more

Hi - some of you may have received an invite to the White House for a 3-hr session to continue the discussion on the Net Zero Emissions building that they released earlier this year. This discussion will be on embodied carbon. I have no idea who the invite went to. If I beg I may be able to go, but if there are plenty of other Architects that... Read more

Welcome to the quiz portion of In-House Daylight Modeling.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain general daylighting theory and design.
2. Simulate towards better daylighting design.
3. Demonstrate how daylight modeling is used in practice.
4.... Read more

Good Morning,  I have so enjoyed reading everyone’s personal introductions.  I am happy to be a part of this group and look forward to working together to create transformation of an industry that is sometimes slow to move.  My name is Patty Lloyd and I am the Sustainability Manager at Leopardo Companies, a Chicagoland area General Contractor... Read more

Hello All,

I'm supporting a project that is pursuing Green Globes and trying to get familiar with its content.  I'm hoping someone might have experience with the program and be able to provide direction toward products that have an OESR.  From what I've read, this is a material ingredient disclosure type report, based on ASTM std. E3182-... Read more

Hello Sustainable Advising members,

Nadav and I have created a spreadsheet based on the matrix you all created at the Summit Palooza. The idea of filling this in with your services and activities is to get to know one another better, be able to support each other and build camaraderie. 

Please take the time to enter the necessary... Read more

If you use the mindfulMATERIALS library to easily access material transparency documentation (if not, check it out!), please take 5-10 mins of your time to fill out this quick survey and help guide the future of the library.

The mindfulMATRIALS Collaborative is an industry-led initiative, visit www.mindfulmaterials.com to learn more. ... Read more