I am looking for a Mechanical Engineering firm in New York state who works in mid-sized commercial (ideally hospitality or multifamily experience) and who has experience with geothermal GSHP systems.

Looking for a recommendation for architectural renderings who would be interested in doing some work for a Direct Air Capture project. A friend is working on a project with Deep Sky and I'd love to make a connection to someone(s) affiliated with the network, if possible.

Axel Slowin

Team,

What are the M vs. E vs. P(FP) ratios of fee distribution you use in your company for a commercial office building?  How about a residential/hotel?

Best,

Luke Leung

Hey Everyone!

We are delighted to share a major milestone in our commitment to sustainable design. After two+ years of intensive research, refining, and internal application, NBBJ is thrilled to announce the external launch of ZeroGuide, an innovative tool for early-phase carbon estimation, now available to the entire AEC community!... Read more

Auto-quiz used for CEUs for attendees of the 2023 SCL Fall Summit.

Many wood panels are unsustainably sourced, and some have high formaldehyde emissions.

BuildingGreen-Approved Panels

Laminate panels approved by BuildingGreen:

Hi All,

I am looking for a lifecycle analysis consultant to work on a feasibility study in New York. They should have capacity to analyze and compare various architectural, structural and mechanical components for environmental impacts, primarily GHG emissions. Any recommendations are greatly appreciated.

_Ilana

Hello Sustainable MEP Leaders!

Here at BuildingGreen we are excited and looking forward to creating a valuable and engaging online summit with you all for 2020!

You can Register Here as well as review important information. The dates to mark on your calendars are June 9 - 11, 2020.

This is a crazy time, full of uncertainty... Read more

Hello Colleagues,

You all know our industry’s progress over the past decade related to the impact of materials. We have come a long way. Today we have over 110 firms that have signed onto the A&D Materials Pledge, pledging to a holistic approach to materials considering: Human Health, Climate Health, Ecosystem Health, Social Health... Read more

Hello, 

I am struggling with understanding if I should be using Annual Marginal Emission Factors (MEF) or Annual Average Emission Factors (AEF) for evaluating different building design decisions.

Everything I know is from this document. So as I understand it ... an individual building or retrofit is going to change the marginal... Read more

Welcome to the quiz portion of New Concepts in LEED v4.

Learning Objectives
Upon completing this course, participants will be able to:


1. Recognize the ways in which the Integrative Process credit requires teams to analyze opportunities early in design.
2. Describe how the new Location and Transportation... Read more

A couple questions for this group. I know we're having a Green Commons meeting on this next week. But can anyone comment on the following questions?

-Have you or your firm split the benefit of the 179D with a client? Is this typical?

-Is prevailing wage a requirement for all 179D benefit, or does it follow the same lines as... Read more

Products & Materials Specialist Brent Ehrlich excels at deep, unbiased, and nuanced technical research on the health and environmental impacts of green building products and materials. Some areas of focus include:

product and material constituents, including their risks

product certifications

third-party product... Read more

Currently, the BIT User site is fully accessible without having to log in (unless you want to edit or add content, of course). The time has come, however, to start restricting access only to logged-in users.

Which sections will be freely visible, and which will be visible only to registered users? Here's what I recall from our earlier... Read more

All, today is the day I had committed to sending out the DRAFT request to equipment manufacturers of what is needed for full electrification.  I apologize that I didn't have time or focus to get my thoughts together till now (I had intended to share this with Chris and others prior to sending to the full group, but just didn't get my thoughts... Read more

Does anyone have a recommendation for software that helps organize and track product and material selections for projects? 

Thanks!

We had so much fun at our Contractor coffee talk that I reached out to our MEP friends to see if they would set up something similar.  And they have agreed to host a talk on Thursday December 2, at 1-2pm EST.  They will talk about decarbonizing buildings, on a schedule that keeps us under the 1.5° C limit and will also address strategies for... Read more