Hello Colleagues,

You all know our industry’s progress over the past decade related to the impact of materials. We have come a long way. Today we have over 110 firms that have signed onto the A&D Materials Pledge, pledging to a holistic approach to materials considering: Human Health, Climate Health, Ecosystem Health, Social Health... Read more

...for all the folks on the west coast.

It’s smokey out there. For anyone looking for a cheap and relatively effective way to clean your indoor air, here is an article on a DIY box fan filters. 

https://www.texairfilters.com/a-variation-on-the-box-fan-with-merv-13-filter-air-cleaner/

This PSA is from our friends at NEEA (... Read more

Hello, 

I am struggling with understanding if I should be using Annual Marginal Emission Factors (MEF) or Annual Average Emission Factors (AEF) for evaluating different building design decisions.

Everything I know is from this document. So as I understand it ... an individual building or retrofit is going to change the marginal... Read more

Hi folks,

I’m sure most of you know Gail Brager, or at least know of her. For those who don’t, she helps run UC Berkeley’s Center for the Built Environment and is a long-time champion of all the things that make buildings work for their occupants. Perhaps most notably, she was a co-author of the Adaptive Thermal Comfort option in ASHRAE... Read more

Hi All,

Attached are the meeting notes from the Carbon Group's 2/26/20 -- also in the PDF are the slides presented in the 2/26 meeting.

Before our next meeting in late March/early April, we are looking for input on the following topic related to tracking and reporting carbon:

We had so much fun at our Contractor coffee talk that I reached out to our MEP friends to see if they would set up something similar.  And they have agreed to host a talk on Thursday December 2, at 1-2pm EST.  They will talk about decarbonizing buildings, on a schedule that keeps us under the 1.5° C limit and will also address strategies for... Read more

Welcome to the quiz portion of Energy Reporting: It's the Law.

Learning Objectives
Upon completing this course, participants will be able to:


1.List the benefits of energy performance benchmarking and disclosure.
2. Address the concerns associated with public disclosure.
3. Restate at least three U.S.... Read more

All, today is the day I had committed to sending out the DRAFT request to equipment manufacturers of what is needed for full electrification.  I apologize that I didn't have time or focus to get my thoughts together till now (I had intended to share this with Chris and others prior to sending to the full group, but just didn't get my thoughts... Read more

Hi,

Are any of you attending this conference? Michelle and I are doing this low-carbon concrete/EC policy work and can't attend this conference on short notice - but if YOU are attending - we might ask a couple of small favors (collecting specific info from trade show etc)

AND/OR: if any of you have attended in the past - was it... Read more

Wood decking requires potentially hazardous preservatives and stains, and plastic waste is a significant environmental problem.

BuildingGreen-Approved Decking

Composite decking approved by BuildingGreen has at least 50% total recycled content. For plastic decking, post-consumer content has to be greater than 50%.

Health and... Read more

Dennis,

I was wondering if you have any previous experience implementing SSO authentication with Salesforce before and if you had any pointers. This morning I created a developer account on Salesforce and enabled it as an identity provider and am in the process of trying to get Drupal to act as the service provider. The Salesforce... Read more

All,

I wanted to spread the word to all of you that AIA Minnesota is hosting a virtual edition of Materials Matter, a five-part series starting next Wednesday 3/24, from 10AM-3PM Central Time on five Wednesdays throughout March, April and May. Come to one ($15 per session) or all ($60 for the whole series of 20 CEUs, including GBCI... Read more

Hey gang,

We're working on a project that's currently designed as mass timber. We're up against some cost control efforts (of course) and the CM/Client is asking about changing some of the building to steel or green steel. We set out with a goal on the project that within the core and shell, Module A GWP emissions will be net zero.... Read more

Anyone know of tools/methodologies for estimating embodied carbon and carbon sequestration potential of individual green infrastructure projects (e.g. bioswale along bikeway)? I've seen tools for the larger scale (e.g. land use change) as well as specific to trees (e.g. i-Tree), but these don't fully meet my needs.

Thanks!

I've been seeing Armstrong's DC flexzone ceiling system at Greenbuild for many years. I'm working on a net zero project with LED lights and solar panels. In theory, the transmission losses in going from DC power from panels to AC for the building to DC for the lights would be eliminated. But does anyone actually have experience using this... Read more