I am wanting to take the pulse of this group on behalf of a manufacturer who has asked us a similar question.

The company in question makes wood products and has had FSC CoC for over a decade. Recently, they are encountering issues with sourcing FSC for about 50% of the wood species they offer. There just aren't FSC sources available.... Read more

Split systems are multi-component units that use an outdoor condenser along with separate indoor fan coils to move refrigerant—and provide heating and cooling—in buildings without the need for ducts.

BuildingGreen-Approved Systems

BuildingGreen approves mini-splits that are tested to AHRI standards and have minimum SEER and an... Read more

Hello friends. For the past two years, we at EHDD have been building a low-carbon design tool to support carbon neutral design at the earliest phases of building projects. Today, the Early Phase Integrated Carbon Assessment (EPIC) is ready for public launch! Many of you have been part of our closed beta test, and today we’re happy to open the... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

In simpler times, our buildings were made primarily from local, natural substances like stone, wood, straw, and clay.

But lifestyles have changed dramatically since these were... Read more

Welcome to the quiz portion of Affordable Housing and Sustainable Design: The Goals are Aligned

IMPORTANT: This quiz covers all related articles within this topic. Scroll to the bottom of the article page to find links to all the articles covered by this quiz.

Learning Objectives
Upon completing this course, participants... Read more

If your HVAC designers are addicted to the crack that is Trace 700, and knowing that Trane is giving up on that product in the coming year, what loads program are you weaning* them onto?

Asking for a friend:  Have any of you had success in using the Revit plug-in for loads?

*When told that they should use IESVE for loads, our HVAC... Read more

Hi everyone!

If you will be attending Greenbuild 2023 or live in the DC area, please join us for a Show & Tell!

When: Tuesday September 26, 6:30-9pm ET

Where: Perkins Eastman, 1 Thomas Cir NW #200, Washington, DC, 20005

Please sign up here to present/attend. Beverages and refreshments will be served. We look... Read more

SAVE THE DATE: ALL Peer Networks Show & Tell
Tuesday, November 19 | 8pm - 10pm
The Kendeda Building, Georgia Tech | Atlanta, GA

Start your time at Greenbuild on a high note!

Join your Peer Networks Colleagues from SDL, SCL, MEP, SDLS, and SAL for a high energy evening full of lightning round previews of the best... Read more

Hello friends. On a current school project, an abuse resistant wall covering has been proposed as an alternative to our typical MDF wainscot. The proposed product has been used successfully in healthcare, and switching to it will save the project almost $1million, which is no small amount when the project is over budget and 7-figure cost... Read more

Some of you saw my 5-minute presentation about the Rich Earth Institute in Brattleboro, Vermont and how it is inventing new ways to keep excess nutrients from urine out of surface waters and use them instead as fertilizer. Now you can also hear about it on Planet Money: https://www.npr.org/sections/money/2018/01/26/581156723/episode-820-p-is... Read more

Hi All,

Polling the group to see if anyone has experience with Simergy - an e+ based modeling tool?

The tool appears to have features and integration with a lot of e+ plugins that make it attractive - but i haven't heard of its widespread use.

Is anyone successfully using Simergy?

Are you or companies considering joining RE100? http://there100.org/going-100

"Companies joining RE100 make a global, public commitment to 100% renewable electricity.

To achieve this goal, they must match 100% of the electricity used across their global operations with electricity produced from renewable sources – biomass (... Read more

Welcome to the quiz portion of The Building Envelope: Primers from Environmental Building News.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how thermal mass helps maintain indoor thermal comfort in buildings.
2. Describe the differences between closed-cell and... Read more

Great career opportunity to make an impact on existing buildings and emissions reductions. City of Seattle will be hiring a full time Building Emissions Reduction Technical Advisor. Closing date to apply is August 6. Please share if you know someone who may be a candidate.

Description from city of Seattle:
Want to influence large... Read more

Hello all, 

Our firm recently signed onto the Material Pledge and while there is no reporting requirements at this time we are wondering how other architectural firms are, or plan to, report projects. 

Thanks for any insight that can be shared!

-Dave

Hi: SD Leaders.  It was so nice to see so many of you at Greenbuild in Chicago. By now I'm sure all have seen the announcement of the release of the Fourth National Climate Assessment Report vol 2. (https://nca2018.globalchange.gov/) It's well worth a deep read - so much important and extremely informative material. I want to draw your... Read more