We had so much fun at our Contractor coffee talk that I reached out to our MEP friends to see if they would set up something similar.  And they have agreed to host a talk on Thursday December 2, at 1-2pm EST.  They will talk about decarbonizing buildings, on a schedule that keeps us under the 1.5° C limit and will also address strategies for... Read more

...for all the folks on the west coast.

It’s smokey out there. For anyone looking for a cheap and relatively effective way to clean your indoor air, here is an article on a DIY box fan filters. 

https://www.texairfilters.com/a-variation-on-the-box-fan-with-merv-13-filter-air-cleaner/

This PSA is from our friends at NEEA (... Read more

Welcome to the quiz portion of BuildingGreen’s Top 10 Green Building Products for 2018.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Explain the transparency and optimization criteria in the LEED v4 (applicable to  Building Product Disclosure and Optimization credits in LEED v4 BD+C and... Read more

Hi folks,

I’m sure most of you know Gail Brager, or at least know of her. For those who don’t, she helps run UC Berkeley’s Center for the Built Environment and is a long-time champion of all the things that make buildings work for their occupants. Perhaps most notably, she was a co-author of the Adaptive Thermal Comfort option in ASHRAE... Read more

Hello Colleagues,

You all know our industry’s progress over the past decade related to the impact of materials. We have come a long way. Today we have over 110 firms that have signed onto the A&D Materials Pledge, pledging to a holistic approach to materials considering: Human Health, Climate Health, Ecosystem Health, Social Health... Read more

We have a client thats going through a TI remodel in a building thats a LEED Core+Shell certified building. One of the questions we are trying to figure out is are there things we need to be doing to not imperil the building's certification. 

I think the answer is that the landlord had to write tenant guidelines at the time of... Read more

Hello Green Gurus!

Thank you to all who joined the cross-networks adventure that was the Sustainability Leaders Week: 2021 Summit-Palooza, all of us at BuildingGreen were so glad to share that time and space with you all.

We have been receiving a few questions about next steps, here are a couple details we wanted to share with you... Read more

Hello everyone,

Here's a reminder that our call for this month will be taking place next Tuesday, November 12th at 2:00pm EST.

Please feel free to join us!

Join Zoom Meeting:

https://zoom.us/j/248664490

One tap mobile
+16699006833,,248664490# US (San Jose)
+19292056099,,248664490# US (New York)... Read more

Welcome to the quiz portion of The Building Envelope: Primers from Environmental Building News.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how thermal mass helps maintain indoor thermal comfort in buildings.
2. Describe the differences between closed-cell and... Read more

Hi All -

I am looking for recommendations for a car charging station for a Catholic convent project we are working on. At this time, the client has requested either 2 charging stations or one station that can charge 2 vehicles. I've been researching chargers and am thinking that it does make sense to specify a commercial-grade charging... Read more

Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

Hi,

Are any of you attending this conference? Michelle and I are doing this low-carbon concrete/EC policy work and can't attend this conference on short notice - but if YOU are attending - we might ask a couple of small favors (collecting specific info from trade show etc)

AND/OR: if any of you have attended in the past - was it... Read more

Hi all,

For your planning purposes for next year, here’s info on an in-person event coming up in 2024:

We are excited to announce that we will be hosting an all-peer-networks workshop for SMEPL, SDL, and SCL members at Miller Hull’s office in Seattle on July 15, 2024. We’re still working out the details, but given the recent... Read more

We are cautiously rekindling the age-old debate: how are we balancing modeling software for design /visualization and performance analysis during early phase of design.  

We are heavy SketchUp users for early design, and most of our staff have access to COVE tool for early performance analysis. Problem is, I’d rather use Revit to COVE... Read more

Hi all,

We are trying to encourage participation in take-back programs and using recyclable packaging with our vendors and I was wondering how we can add it to specifications. Does anyone have any examples on how we can add wording in specs about participation in take-back programs, using recyclable packaging and/or reducing non-... Read more