Forum topic
Hi All,
I am looking for a lifecycle analysis consultant to work on a feasibility study in New York. They should have capacity to analyze and compare various architectural, structural and mechanical components for environmental impacts, primarily GHG emissions. Any recommendations are greatly appreciated.
_Ilana
Quiz
Welcome to the quiz portion of Green Building Product Certifications: Getting What You Need.
Learning Objectives
Upon completing this course, participants will be able to:
1. Differentiate between a standard and a certification.
2. Describe "greenwashing" and list at least two ways to spot it.
3.... Read more
Forum topic
Hello,
Are you aware of any bldg codes that have included requirements related to Material Health?
Thanks!
Mona Lemoine Architect AIBC, MRAIC, LEED AP BD+C, LFA, Regenerative Practitioner, RELi AP
Associate, Senior Sustainability Consultant
Mobile: 236-878-1752
mona.lemoine@stantec.com
Stantec... Read more
Forum topic
Sometimes referred to as “the dark side”, the construction industry isn’t actually so bad. We are mostly good people. And, we need good people.
Consigli is hiring a Sustainability Manager to work in Massachusetts, and we could use your help to fill the role. If you or someone you know is brimming with the sustainability force, please... Read more
Quiz
Welcome to the quiz portion of The Building Envelope: Innovations in Planning, Materials and Budgets (recorded webcast)
Learning Objectives
Upon completing this course, participants will be able to:
1. Explain how to make the building envelope of a rehab super-insulated and resilient.
2. Recall innovative... Read more
Quiz
Welcome to the quiz portion of The BuildingGreen Guide to Insulation!
Learning Objectives
Upon completing this course, participants will be able to:
1. Discuss how insulation works to increase the energy efficiency and environmental sustainability of buildings;
2. Explain why certain materials make more sense than... Read more
Forum topic
Please see the following invite from Professor Alexandra Rempel at the University of Oregon to participate a 15-20 minute phone/Zoom interview and share your experience and/or perceptions on the problems, challenges, and barriers to incorporating into your projects.
This effort is part of an NSF research grant that I am involved in and... Read more
Forum topic
Hello Green Gurus,
Here’s a reminder that our first Show & Tell for 2021 is happening next week! Monday, February 1st from 7-8pm ET and Tuesday, February 2nd from 4-5pm ET, come see your peers from all networks present for five minutes each on a variety of topics relating to their work.
This event is connected with the Summit-... Read more
Forum topic
All,
I'm sure a few of you attended our recent webinar on the LEED v4.1 LCA webinar. In case you missed it, the recording is posted. We were stunned by the amount of engagement from the audience; we allotted 30 minutes for questions and I think it went even longer. The webinar recording should be a great starting point for anyone... Read more
Sales page
THIS WEBINAR REGISTRATION IS CLOSED.
A Free LEEDuser Coffee Talk occurred on Tuesday – September 19 – 1:00 to 1:45 p.m. Eastern (10:00–10:45 a.m. Pacific)Point: Green building is all about the environment—not social justice.
Counterpoint: The green building movement must ensure that the benefits... Read more
Forum topic
The Resilient Outcomes Working Group grew from a session at the 2020 Winter Summit in Gulf Shores AL, and we are still going strong. We are currently focused on three primary objectives: 1) bringing awareness to resilient design through a presentation at the GreenBuild 2024 Resilience Summit (we'd love to see some peer network friends at our... Read more
Forum topic
Hi all,
Jacobs is looking to hire specifically for sustainability needs! We have a current job posting for a Senior Sustainability Specialist now up, and anticipate a similar posting soon for a mid-level person as well. Location for these would be in the Mountain or Pacific time zones, remote work is fine; other future anticipated posts... Read more
Product Guide
CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.
Rainwater capture is increasingly important as shortages put pressure on our water systems.
BuildingGreen-Approved Rainwater Harvesting
We approve a wide range of rainwater catchment and storage systems and components, with... Read more
Forum topic
Hello All,
News Bulletin: The 2020 SDL Winter Summit will be held January 29th - January 31st, 2020 at The Lodge at Gulf State Park, Alabama!
During the 2019 Winter Summit, we discovered such an amazing venue at the Gulf State Park in Alabama that we’ve decided to go back! This incredible beachfront hotel designed by Lake|Flato is... Read more
Forum topic
Hi All - I wanted to share out the All For Reuse initiative below by two peers in the sustainable materials management network. I know some SDL have already done much research on this from quite a few angles, and those with LBC experience probably even moreso in practice.
Frances Yang (Arup) and Andrew Ellsworth (Doors Unhinged) have... Read more
Forum topic
Hi folks,
We have a really great webinar set up for Thursday, Oct 25 at 2pm eastern. This one is based on the 5-minute presentation from Heather DeGrella at the Summer Summit--our jaws were on the floor when she presented it there, and we were hungry for more.
Sign up here: https://zoom.us/webinar/register/... Read more
Forum topic
Hello,
Has anyone come across a rating system 'crosswalk' infographic?
Cheers, Mona
Forum topic
Hey there Hive Mind,
I'm tossing a question out here as I know various compositions of us have had pieces of this conversation about how operational and embodied decarbonization has been incentivizes at state and local levels through various regulatory frameworks. I meant to do research on this topic for a project team of mine and time... Read more
Forum topic
Folks, would love to hear what software you're for in-house daylighting/energy performance modeling at the SD/DD level. My IT folks have been pushing us to try out Autodesk's Insight again after a not so impressive pilot we did a few years ago. Has it gotten better? Was it us? What programs do you feel good about? Which ones really make you mad... Read more