Southface will need a procedure for adding and assigning SMEs to the BITuser site. Normally you could just create the user in BITuser and assign the role right there, but we have the added complication of Salesforce SSO, which means the sequence will have a few extra steps.

Here's the basic outline:

Create an account for the SME on... Read more

In our quest to create a low carbon future the lectrification/Decarbonization working group is planning spend the next 10 months creating tools to advocate for electrification:

How to create a grid that works for our electric future. How to electrify buildings, both existing and new. How to advocate for policies and legislation that... Read more

Does adding solar panels reduce a building's EUI?

Existing operational use of a building is 80 kBtu/sf/year. When we add solar, it will change the source of energy but does not change the usage.

My understanding is that the EUI does not change, but it would be good to hear from others.

It's energy consumption at the point... Read more

This is specifically to Chris but also to anybody who is interested in the topic - which Chris raised on our SAL call today, regarding how to influence change:

From this article, which i thought was good but had a great paragraph pulled below.

https://www.nytimes.com/2020/02/12/business/Steve-Mollenkopf-Qualcomm-corner-office.html... Read more

Huge shout out to Patty Lloyd, Luke Leung, Janet Olsen, and Sarah Gudeman for their webinar on the Power of Peer Networks. They share lots of insights into the value of participating in BG Peer Networks and many others. Ten bucks to Illinois Green gets you access to the recording--I loved it. What would you have said that they didn't?

Question for you all: there is this wonderful graph showing how we can shift mechanical and electrical dollars into envelope investments to make deep energy savings cost-neutral. Have you experienced this on a project?

1-minute or less survey! (two questions, more detail if you want)

https://docs.google.com/forms/d/e/... Read more

Successfully managing the LEED documentation process requires specific knowledge, tools, and skills that are not covered in the LEED Reference Manual. This CEU course is based on the LEED Project Management course that GreenStep developed and teaches through UC–Berkeley Extension. It is designed for professionals who are somewhat familiar... Read more

Hi,

I have a colleague doing research on PCM in several projects. For context in their report, they were wondering if this group has seen any recent increase in application of PCMs in recent years. Is it just in ceilings or other applications? If so, what products are being used? They were having difficulty finding manufacturers other... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Hello! Long shot here, but I thought I would try.

Alex Wilson and I are working on an article about priorities for the next four years under the Biden-Harris administration. We'd like to feature some recent photos of climate demonstrations, protest signs calling for the Green New Deal, or other environment-focused illustrations of... Read more

Does anyone subscribe to Green Badger? Do you find it valuable?

BuildingGreen is the most trusted voice in sustainable design and architecture.

This ad-free, member-supported resource is here to guide designers in using high-performance strategies, and in selecting sustainable and healthy products.

If you haven't already, start by creating your unique user profile to get your log-in, and be... Read more

Welcome to the quiz portion of What Makes a Product Green?.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. List and describe at least three attributes that address each of the following categories: "efficient use of materials"; "responsible sourcing"; "energy and water... Read more

Hi all,

The Healthy Building Network, now Habitable, was kind enough to develop printable versions of their Informed Product Guidance for us. I think these are a really great resource for design teams looking to select better product options. While the web version is great, we are using the printable version to hang select sheets around... Read more

ASHRAE 209 in all its glory has been uploaded. This will impact our architectural process, for better or worse, so we should embrace it and learn from it. The revised AIA Energy Modeling Design Guide (due out next year) has been timed to correspond roughly to 209 coming out and will include references to it. The first few energy modeling '... Read more

Hi All,

I'm working on a LEED for Schools project under 2009, and received some amorphous comments back about our Mold Prevention Plan. We used the LEEDuser template as a guide, while also referencing the EPA document the credit is based around, but the reviewers feel we haven't provided proper metrics. The EPA plan is something like... Read more

Hello Gurus,

I’m writing to share with you an effort a small group of lighting designers from the Boston area started which is now rolling into a large scale effort.  We’ve put together a Lighting Advocacy Letter to accelerate the sustainability of lighting products. Inspired by the AIA Materials Pledge, the letter is intended to... Read more

Quiz body